Bucking Fields to tap energy from the blotch wall.

Bedini style motor/generator. Twin rotors are counter rotating magnetic fields in reference to Oleg Jefimenko, "Force Exerted on a Stationary Charge by a moving Electric Current or a Moving Magent", American Journal of Physics, Vol 61, pages 218-222 (1993). This was in hopes of generating twice the amount of rotor power than using only one. This is also a hybrid mix between the Kromery Motor, The Adams motor, Newman Motor, Bedini Motor, and me. The coil remains cool at room temperatures and is ambient. This indicates superconductivity, by eliminating resistance by having equally sized wires within the coil charging and equally sized load, such as a battery equal to the source. In fact resonance between a coil and capacitor in a simplistic LC circuit occurs when the capacitance equals the inductance of the coil, then resistance is eliminated. If resistance is eliminated, then it is possible to keep all our generated power with next to no loss in a closed loop circuit because resistance is the very thing that causes the opposing magnetic fields dictated by Lenz's law.

Category:

Science & Technology

Tags:

• free energy
• pulse motor
• motor generator
• zeropoint energy
• radiant energy
• aether
• ether
• counter rotation
• blotch wall
• collapsing field
• zeropoint energy field
• antigravity
• unified field
• grand unified field theory
• neutrinos
• dark energy
• antimatter
• dark matter
• longitudinal waves
• scalar waves
• bucking fields
• opposing magnetic fields
• standing waves
• vacuum energy
• energy from the vacuum
• cosmic energy
• adams motor
• newman motor
• bedini motor
• resonance

[FujiSatori]

Very informative and well executed work. my compliments. LKet's spread the knowledge, it will empower us a a society.

Check out my channel for quantum power let's fill the knowledge pool

[KanyeTroll]

bucking magnets, how do they work?

[YSBCITTAR]

Nice work...

[FreeMagneticEnergy2]

@debunkified, to take this one step further, make your secondary coils to go over and under the wheel by one third of the way inwards towards the wheel's center. This will improve the induction by about 30-35% per coil. Tricky to make, but the pay off is worth it.

If you have not already joined our think tank for Free Magnetic Energy at our primary website, you should do so. Currently we have just over 200 members and soon we will be launching our first brainstorm.

Great setup, great video.

[FreeMagneticEnergy2]

@debunkified, to take this one step further, make your secondary coils to go over and under the wheel by one third of the way inwards towards the wheel's center. This will improve the induction by about 30-35% per coil. Tricky to make, but the pay off is worth it.

If you have not already joined our think tank for Free Magnetic Energy at our primary website, you should do so. Currently we have just over 200 members and soon we will be launching our first brainstorm.

Great setup, great video.

[FreeMagneticEnergy2]

@debunkified, to achieve more input to the battery then out from your setup should be easy as long as you are at least half of the way there. Simply build separate coils to fill in the remaining circumference using 26 AWG magnet wire and wire the two sets of additional coils from each skate wheel together in parallel series. This will give you both increase in volts and amps. Then you should have far greater output then consumption. The secondary coils need to be contoured to the wheel.

[msearson1]

Many Thanks for sharing. Sounds extremely interesting. .... BUT ... The ONLY important thing as far as I am concerned is - What is the COP of the system ? If it generaltes more than it consumes or not. That's the "clincher" as far as I'm concerned. If it's less than one it means nothing much. If it's more than one then the inventors have earned their stripes and we need to sit up and take notice.

All the best.