Shark vs 3M surface prep Surprising Results
Loading...
Uploader Comments (davidclarkcarroll)
All Comments (5)
-
@davidclarkcarroll Once again I ask the question please explain the benefit of your non-woven material and how its manafactured, why is it so different????
Also I will raise the point that you are not using the correct product to go head to head with the 3M offering
-
You are using the wrong 3M product. If you do a lot of these you should go on their web site and contact a local rep. To get him to demo a better product.
-
Once again you are not using the 3M Product for what it is designed for, That 3M product is a Surface Conditioning product more aligned to cleaning of Sheetmetal before painting etc. If you want to remove paint rust etx why not demo using the 3M Purple Clean n Strip in Roloc variety......................a
lso explain on how your non-woven material is manaufacture versus the 3M
2:21
3M™ Power Tools : Inline Sanderby 3MAbrasives16,755 views- 2:09
3M 985C Fibre Disc Challengeby 3MAbrasiveSystems3,229 views
- 1:48
3M Deburring Solutions - 3M Scotch-Brite Bristle Brush & Deburring Wheelby 3MAbrasiveSystems7,760 views
- 1:13
SPIDER SANDERby TandTDesign46,144 views
- 0:58
Light surface conditioning on metal with SuperBrush sanderby SupermaxTools1,118 views
- 0:40
3M Red Abrasivesby JamestownTV2,178 views
- 2:10
3M™ Cubitron™ II fibre discby 3MSchweiz5,452 views
- 6:48
Shark vs Merit Abrasives surface prep disc comparisonby davidclarkcarroll239 views
- 1:21
3M™ Cubitron™ II Fibre Disc 982C Grinding Demoby 3MAbrasives12,061 views
- 1:13
3M Tools --- General Purpose Sanding Tip - Indapac Ltd East Branchby IndapacEast689 views
- 2:18
3M Clean Sanding Discsby JamestownTV15,414 views
- 2:00
Scotch-Brite™ Durable Flex Belt for Right Angle Stainless Steel finishingby 3MAbrasives12,607 views
- 0:39
3M Portable Dust Extraction Unit - Self Cleaningby 3MAbrasiveSystems3,016 views
- 1:51
HOW TO CLEAN & POLISH METAL CLAY CASTING 2 - JOOLTOOLby JooltoolUSA2,435 views
- 0:34
shark vs fishermanby Berinoss815,588 views
- 2:03
3M Abrasives --- Weld Repair - Indapac Ltd East Branchby IndapacEast314 views
- 3:20
3M Perfect-It Paint Finishing System: Swirl Eliminationby JamestownTV11,381 views
- 9:13
Paint Stripper Remover Fast, Clean and Easy www.upkeepers.ieby upkeepers54,990 views
- 2:10
NEW 3M™ Cubitron™ II 982C Abrasive Fibre Disc - Weld Grinding Comparisonby 3MAbrasiveSystems5,831 views
- 1:12
Poker Run - Trailer (HD)by PokerRunFilm81,101 views
The benefit is that the Shark product lasts twice as long and is much less expensive. It is not important why it is different. It is important that it really does work better as the video clearly shows and costs substantially less. It really wouldn't make any difference what the two products were tested on. The Shark product is always going to last longer because it is twice as thick. Also because it is much less expensive it is always going to be a much better value wherever you use it.
davidclarkcarroll 4 months ago
The purpose of the video is to show that the Shark product will last up to twice as long as the 3M product and will generally cost substantially less. This would be the case whatever surface the products were tested on.
The reason for this is because the Shark product is almost twice as thick as the 3M product and the Shark material is more dense. Thus the bottom line is the Shark material will last longer regardless of the surface it is used on.
davidclarkcarroll 11 months ago