Built 327 Chevy

1964 small journal two bolt mains. Bored 0.30. Flat top pistons, 2.02/1.6 world sportsman 2 cast heads, 1.6 flat tappet rockers, 284/296 comp xtreme energy hydraulic flat tappet cam. Weiand tunnel ram and two holley 650cfm carbs. Timing set at zero degrees

Category:

People & Blogs

Tags:

• 033

[n5ifi]

These are double pumper 650's right?

How do you have them jetted?

[jp21scball]

@n5ifi no, they are single pump 650's. I am not exactly sure how they are jetted, a good friend of mine tuned them perfectly. The guy you see in the video to be exact

[shovelour]

that bad boy sounds like it wants to be turned loose. why 650's instead of 450's?

[jp21scball]

@shovelour The 650's are perfect for it, we tried running it on just one but it was sucking the flaps shut so we had to hook the second up.

[JebHardly]

Pretty awesome.



[jp21scball]

@JebHardly Thanks Jeb!! It was a great amount of fun to build. This Beaut is bolted to a 66 chevelle frame that im restoring. (pictures on my facebook page).

[akinajj1]

oh man i rebuilt a 327 like this but with a 750 double pump n with 11:1 comp n a 280 dur. cam

[Mematt120]

My dad and I are rebuilding a 66 327 for my 87 Pontiac Trans Am. Hope she turns out as nice :)

[1986irocz305tpi]

So responsive love these little nostalgic small blocks and its good to know somebody else built an engine for their senior project! I built a 355sbc. Nice vid

[desertwalker425]

ALL IN ALL BROTHER IF YOU BORED IT OVER .30 THAT WOULD MAKE IT A ABOUT 347C.I IF IM THINKING RIGHT--HOLLAR IF YOUEVER NEED ANY HELP I USED TO BUILD COMP MOTORS FROM 83-93 KINGS HORPOWER MOTORS--LOOK ME UP! USAC,NHRA,AHRA TOO AND A FEW OTHERS! KEEP IT UP YOUNG MAN!LISTEN TO THAT OLD SCHOOLER HE KNOWES~!!

[desertwalker425]

QUESTION! WHY DIDNT YOU GO WITH A COMP CAMS MAGNUM CAM~!??? I RUN A SONNY BRYANT 372 515HP AT THE BELL HOUSEING WITH A COMP CAMS MAGNUM 292/501 I THINK THE MAGNUM CAM SERIES RUN MORE MID RANGE AND TOP END TORQUE~! I RUN LOW 10'S IN MY 79 CHORT BOX CHEVY TRUCK~! WITH A 2700-3000 STALL! THAT MOTOR WOULD GO GOOD IN A 66 OR 67 DUECE~!

[wardupyo]

@greenjeens That's just tunnel rams for you, very snappy response. The 327 has a short throw on the crank allowing it to rap more rapid as well. But the number one reason is not having a transmission hooked to the back. All engines will rap fairly quick when they're not hooked to anything.

[fukQazzhole]

327 BADDEST SMALL BLOCK EVER

[bigcotie]

WOW ! sounds great

[majorswiftfan]

@jp21scball  it sounds good but the idle is off a wee bit

[mudderchevy1976]

Nice. Sounds mean