TB6560 Chinese 3 Axis Driver Console
Loading...
Loading...
11,310
Loading...
Uploaded by hossmachine on Oct 24, 2010
TB6560 Chinese 3 Axis Driver Console
Not a good driver for the G0704, only 24 Volts 3 Amps, this is just testing it's function.
Driver is only $64 shipped
http://shop.ebay.com/quality-gadgets/m.html?_nkw=TB6560&_sacat=0&_trk...
- 10 likes, 2 dislikes
-
Uploader Comments (hossmachine)
see all
All Comments (4)
-
You just completely saved me all kinds of money... I was about to buy a new computer thinking it was my computer that had the problem... I have been fighting this driver board for days... even sent one back and got a replacement... still to have the same problem......your tip at 3:15 was the key.... Now it works perfect... thank you very much for you taking the time to post this...
-
like what you are doing...keep it up.
Loading...
- 1:24
Auto Zero in Mach3by petera230815,521 views
- 1:14
TB6560 4axis driver board & motorsby bm140014,686 views
- 3:01
5 axis robot armby manycnc19,202 views
- 2:10
MaxNC 10 Personal 3-axis Benchtop CNC Millby mitchellsk10,042 views
- 3:50
5 axis CNC machining - metall frameby AJGruppEst57,209 views
- 1:47
CNC - EMC2 -by kapbrasil71,497 views
- 40 videosЧПУ
- 4:53
Controladora Toshiba TB6560 Stepper Driverby Eolo96912,834 views
- 1:26
CNC Router ,Nema17s, Mach3by mcnabster6,629 views
- 3:27
Touchscreen controller for DIY CNCby marcom990010,956 views
- 0:54
Toshiba TB6560 Bipolar Stepper Driver test run I (1/8 step)by bladika26,457 views
- 2:04
Homemade cnc routerby ProjektSS74,528 views
- 2:41
7x14 lathe CNC kitby cncjedi62,639 views
- 1:16
Mach2 Mach3 CNC Control Driving a CO2 Laser Machine for Engraving and Cuttingby speedythinker42,848 views
- 9:27
Mach3 Setupby bwt05156919,865 views
- 3:08
My Homebuilt, Belt-on-Belt drive, CNC Routerby homer971407,253 views
- 0:38
CNC611 low cost 3 to 6 axis cnc kitby ideegeniali372,771 views
- 5:15
CNC USB Controller - connecting controller to driversby kroko13a40,277 views
- 2:39
RF 31 MILL DRILL 531by industryrecycles3,812 views
- 2:45
Hobby CNC Machineby gpm4985341,626 views
I have thought about CNC converting one of the Bridgeport knee mill's where I work. I have also thought about getting a Grizzly mill someday, in particular, the G0704 and and using the kit from CNC fusion. I have looked at various other company's, even Sherline and their mini machines. I'm concerned about the rigidity of the table though on the G0704. How is tool chatter?
epicuniversal 1 year ago
@epicuniversal Having run kneemills for a living, I'm very impressed with the rigidity of the G0704. Can handle about 1/2 of what a kneemill can yet weighs 1/10th.
hossmachine 1 year ago