DigiExpress - iPhone 4 Screen Installation Repair ATT GSM

This video will show you how to replace the Screen Assembly (including Glass, Digitizer and LCD) in your Apple iPhone 4, for the AT&T (GSM) model only. For parts, tools or more help please visit our website at http://www.DigiExpress.us

Category:

Education

Tags:

• iPhone 4
• iPhone 4 Screen
• iPhone 4 Screen Repair
• iPhone 4 Screen Installation
• iPhone 4 Glass
• iPhone 4 LCD
• iPhone 4 digitizer
• iPhone 4 lcd installation
• iPhone 4 lcd repair
• iPhone 4 front glass

[Randominize]

Do you think its possible to replace an ipod touch camera and put the iphone's camera on it?

[DigiExpress]

@Randominize Unfortunately it is not possible. The ribbon cables that have the circuitry on them (CMOS sensor etc.) have a connector on the end, which has a certain row of "teeth". The connectors will not match up and thus the camera will not work. Unless you will want to disassemble the camera in its entirety and run leads from each pin to the (assumed) corresponding pin on the logic board, then it *may* work. Building a time traveling DeLorean would probably be easier.

[dannyx4333]

i did this exactly what you did and when i try to turn on my phone nothing happens at all

[DigiExpress]

@dannyx4333 If you plug the iPhone into the USB port of a computer and then launch iTunes on that computer, does iTunes recognize the iPhone is plugged in? You may have damaged the power button by some chance or you do not have the LCD ribbon cable fully attached to the logic board (the connection is below the black metal shield at the top of the logic board). Please reply to this message with any updates and we will do our best to help you out.

[KhizerZaman]

I followed all the steps for changing the screen. Although the phone does turn on, the screen doesnt show anything! It just lights up thats how I know the phone is on. Please help! Does anyone know what I might be doing wrong?

P.S I followed all the steps in the video!

[DigiExpress]

@KhizerZaman Sounds like the LCD connection to the logic board is not seated properly. The ribbon cables that feed through the frame and are attached to the logic board latter, they sit underneath a black metal shield. Check your connections to ensure that it sits flush and "feels" connected. Also check that ribbon cable for any tears or rips that may have occurred when pulling the cable through the frame. If your iPhone is water damaged, then you may have another issue entirely

[iJbreak]

So basically take the whole phone appart, put the lcd in, and put it back together? LOL

[ccc822007]

thats why you never break an iphone 4 screen :P

[tcano98989]

this sounds like bad porn music.

[gokarter28]

Thank you so much for a full tutorial. Because almost everyone else skips the reassembly, I'm glad I found this(: It will come in handy when the parts for my iPhone come. Thanks

[HausOfCue613]

I replaced the screen and it worked great but now the iPhone won't charge.

PLEASE HELP

PLEASE HELP

[GooRoov21]

after doing this my home button isn't working?

[coachcraig0512]

DigiExpress!!!!! You are the BOMB!!! Thank you soooo very much for having such a detailed video of how to replace the front screen. It was so easy even noobs like me can follow it. I took my time...an couple hours....pausing your video as needed but with your help it was super easy. You saved me a lot of headaches. I will be speading the word about your user friendly video.

GOOD JOB DigiExpress!!!!

[new8020]

@DigiExpress i only see white lines when i turn one the phone, what can i do