Stirling Engine
Loading...
Loading...
1:31
Stirling engine - mRT -1k - animation.aviby duncanajames11,995 views- 0:21
Red River College Stirling Engine Animationby Kuragari106,401 views
- 0:06
STIRLING rotatif SPRATL 3D vue générale en fonctionnement 6by SWINGREGORY31,795 views
- 1:49
Stirling Cycle Engine - How it worksby engineeringjohnson93,330 views
- 9:03
Stirling Engine With DC Generatorby DadHav121,491 views
- 2:58
Stirling Engine with Rhombic Drive Part 1by barumman277,701 views
- 1:35
Stirling Engine Mechanismby samarthreddy24,957 views
- 1:23
CHP SYSTEM1(Gasifier and Stirling Engine) It went off without a hitchby KirinHaze22,226 views
- 0:49
Alpha Type Stirling Engineby samarthreddy7,377 views
- 2:01
Stirling Engine Powered Canoeby kenboak653,362 views
- 0:35
Miniature stirling engineby stirlingbelgium1,813 views
- 0:10
Stirling Engine Animatieby Lenstrato14,984 views
- 63 videosmushroomhead
- 0:11
Animation of the ST05G-CNC Experimental Stirling Engineby VEIngenieure18,350 views
- 0:10
Stirlingmotorby kidn4per248,614 views
- 0:37
3D Stirling Engineby ryanvd13,001 views
- 0:40
stirling engine sm3by simir0uvf46,286 views
- 3:58
Demonstration of wood burning Stirling engineby caloric16476,846 views
- 5:15
What is a Stirling Engine?by paulie198215,156 views
- 1:37
2-cilinder Stirlingmotor (3dsMax) v2by Lenstrato1,868 views
*****
piespokladowy 1 year ago
Nice animation, what tool did you use? The phase angle of your pistons is all wrong. The engine would never work as shown. You need to look at the phase of the working fluid, not just the pistons. The linear alternator is also a bad idea. the magnets slow to a stop at each end of stroke. You don't have a flywheel either. Just replace linear alternator with axial flux gen/starter and it will double as the flywheel. Flywheel speed would be constant so much better output than linear alt.
rptopf 1 year ago
I dont think it will work like this, seems you have the phase angle wrong between the displacer and piston?
R.
electrique527 2 years ago
Amazing! I've been looking for the similar idea when I saw The New Stirling engine from Infinia Corp. Love your work! waiting to see the first prototype!
aburifda 3 years ago
Hydrogen can be used as working gas, and it will not be recharged as in other cases of stirling engines. It can simply no leak out.
The generator in the engine is genius.
This is the future people! Watch and Learn!
Lubobuba 3 years ago
Let's analyze it!
1) Engine is pressure independent(enclosed in shell). This gives several advantages. First is that the working mean pressure can be increased by will, which is going to increase the thermal efficiency. This in turn will decrease the requirement for a large temperature difference, which in turn is again going to increase thermal efficiency, and is bringing this engine to a Carnot efficiency(close).
Lubobuba 3 years ago
VERY COOL ANIMATE
SWINGREGORY 3 years ago