X Clamp Fix - RROD Repair Guide Part 3: Installing the X Clamp Kit & Overheat Process
Uploader Comments (xclampkit)
Video Responses
All Comments (51)
-
use artic cleaner its cheap and it works
-
Nice, scam.
-
Hey i have used this tutorial before and it fixed my xbox, now my xbox has rrod and i follwed the tutorial and my xbox still has rrod. Any help?
-
Umm.... I'm just a bit curious. What happens if you reassemble a 360 without the thermal paste?
-
Use Arctic Cleaner to remove the thermal paste!!
-
ok so i got into the point that i need to overheat my xbox but when i turn it on, i still get 3 red lights and i left it on for about 2 hours and it doesnt overheat. please reply me. what can i do to get my xbox overheated?
-
I fixed my xbox elite and now the rrod is gone. But when playing games and on the xbox dashbord it freezes now and then. Why. Thanks.
-
In the overheat process, you don't connect the fan, is this correct?
-
thank you very much, i wasnt really a xbox owner before but i watched some videos about this and i got a broken old 360 from my friend, so with this guide I managed to get it work! now i'm a happy xbox360 owner :)
-
WHAT FUCKING GAY MUSIC.
i didnt put alote of heat sink compuand only a little bit and you no the chip i put the compound on? and the thing that goes over top of the chip do they both have to touch?
ExplosiveGamlng 1 year ago
@ExplosiveGamlng Yes both heatsinks must make contact with their chip, otherwise the xbox 360 will overheat instantly.
xclampkit 1 year ago
i tightend all the screws and when i put dvd drive in and video and power cables in and turn it on its already shows 2 red lights and i can turn it off from front?
ExplosiveGamlng 1 year ago
@ExplosiveGamlng You may have to tighten the screws a bit more, or you applied too much thermal paste, resulting in poor contact. I will send you a video to an alternative overheating process as well that may help.
xclampkit 1 year ago
does the cpu and cpu chip have to touch when you tighten the screws?
ExplosiveGamlng 1 year ago
@ExplosiveGamlng Heatsink Compound will work. Also I assume you are talking about the heatsink and cpu chip touching. They must make contact, so don't use too much heatsink compound, but don't overtighten the screws either.
xclampkit 1 year ago