pump jack oilfield engine DIADEMA ENGINE (Ex KUBOTA)

Pump Jack engine now DIADEMA ENGINE

Category:

Science & Technology

Tags:

• engine
• mechanics
• pumping
• unit
• jack
• pump
• Kubota
• Diadema
• oil
• field

[theklrdude]

i;m getting sea sick from this !!

why not hold the camera still

[madoil07]

@theklrdude Hello, Sorry about that!! it's an amateur video! Thanks for see our video!

I love you video very profesional!

[RainJetSprinklers]

Nice engine. We run a electric system in the Olinda Field, but we have some of these engines in our small, remote fields. Do you offer a kit to run these off natural gas out of the well?

[madoil07]

@RainJetSprinklers ; COMPLETE KIT ENGINE, READY TO SOURCE THE NATURAL GAS!

[kamphwagon1]

@madoil07 A lot of the producers around here in central Ok run these screw pumps in place of electric submerseable when theres to much fuid for a conventional pump jack , usually a formation that has a water drive where the fluid level has to be lowerd to allow oil to come into the bore hole. If the TD of the well is around 4,000ft or less these pumps can move as much fluid as a small Redda for less electrical costs,as a lot of the wells here don't make enough gas to keep a gas engine going....

[madoil07]

@kamphwagon1 Thanks a lot for your comment!; like you know those screw pump or PCP run in low speed and this engine run in low speed so... they don't need the gear box just pulley for adjust the right speed; with electric motor has to use gear bos for reduce the speed; It's a cheap option use low speed engine and also burn your own natural gas well

[kamphwagon1]

@madoil07 See you had one turning a mono elastomer screw pump , I like the way you set the engine back far enough to allow room for a pulling unit to pull the rods & tubing , some of these guys mount a electric motor right on top of the gear box , makes it a pain to get the gear box off with a motor mounted on it, the gear box is heavy enough without a motor on it, we usualy lift it off with the rig and pull it off to the side with the crew truck.

[MrMadoil]

@LPV1974

No this is not me doing this, But these engines are coming back, You must be bored

Ron

[madoil07]

@LPV1974 Thank you Les! for visi our page...

[LPV1974]

This must be from Ron At Mad Oilfield!

Is that you Ron?

This is Les from SHEARER...AXXXW engine distirbutor