Eleven rack / Pro Tools LE problem

im running windows 7

Category:

Music

Tags:

• eleven rack

[ritterdude]

Buy an Apple.

[ritterdude]

Bu an Apple.

[RandyMartinGuitar]

If it's of any help, I also got the E.R./P.T.LE a couple of months ago running windows7. After upgrading P.T.LE to 8.0.4. it worked great for many hours. Then I had the "no sound" problem. I called Avid,they "took control" of my computer, did all sorts of things in 3 calls and a couple of hours and at some point just said "it's the E.R. itself" and sent me another E.R. Nothing but very minor glitches since then. Don't give up! It's a powerful combination when working right! Good Luck.

[ToneQuestDemos]

I think you should make a video of you Punching it.

[neilmacmusic]

Post #6

JUST REASSURING YOU YOUR PROBLEM HAS NOTHING TO DO WITH CABLES

HARDWARE SETUP ETC.

IT IS PURELY AND SIMPLY A F**ED UP I/O CONFIGURATION

FIX AS BELOW

[neilmacmusic]

Post#5

If you need some more one-on-one help i can guide you thru it via Skype

or via email

I will check your response and stay in touch!

cheers Neil

(PS I have used Digidesign professionally since 1991 - hey that's 20 years!)

[neilmacmusic]

Post #4 You will have also noticed the i/o and record paths etc. now have the proper names i.e. Main out L and R Rig Output L & R Mic in Guitar in etc. My problem arose because I had had an Mbox 2 PRO before i 'upgraded' to the Eleven Rack and all my old sessions contained the old Mbox i/o because i had that little box ticked !! Get rid of any duplicate i/o paths on ALL of your pages - they will be the ones named as per your original i/o from before you got the Eleven Rack Enjoy!!

[neilmacmusic]

Post #3

Deselecting this tick box ensures that your i/o WILL NOT CHANGE

and all your Eleven Rack inputs and outputs will always be correct!

What you have been experiencing is a form of Digital feedback

- sounds AWFUL and is exactly what I had!!

Every time I selected Record I got this god-awful feedbacky/digital/horribleness

and worse still my recordings when played back were Left channel only and clean

(direct guitar sound only) I nearly went nuts trying to figure it out!

(cont. Post #4)

[neilmacmusic]

Post #2 Go into the i/o setup page - then go to import settings button at the bottom and select the Eleven rack default i/o file Do this for every page - input output busses etc. All i/o must be the Eleven Rack default You now have the correct Eleven Rack i/o Delete any i/o paths you may have made also THEN (MOST IMPORTANT) DESELECT the tick box at the bottom of the i/o page which says something like "Current session overrides i/o settings" (continued on Post#3)

[neilmacmusic]

Man i can't believe AVID couldn't help you!

I had the EXACT SAME PROBLEM and figured it out myself!

Firstly there is NOTHING wrong with ANY of your equipment

What you have is an incorrect i/o setup which is being overridden by your session settings so no matter what you do whenever you open that session the old wrong i/o setting loads too!

Here's how to fix it - it's easy!

(i've run out of words - please read next post)