FSB Removal.wmv
Loading...
Uploader Comments (ssdsurf)
All Comments (18)
-
Glad you got it to break free! Sometimes a large breaker bar or a good hammer helps!
-
Finally got it. I had to put the wrench in place and the smack it a few times with a hammer. Finally broke free.
-
Thanks! I finally got them out. Now Im stuck on the stupid barrel nut. Im wrenching the heck of of the thing and it won't turn. Im doing it counter clockwise like every where I've looked says..But is it opposite too?
-
good video. And good 80's music lol.
-
look on both sides of the FSB.. you will notice that one side has smaller tapered holes and one side slightly larger, punch from the small side out the larger side, trying to go the other way will NOT work or it will and you'll then have a damaged FSB
-
I even posted my 1st YouTube vids with my 3-gun weapons under MrBlister1972. ;)
4:25
Low Profile Gas Blocks VS. Shaved FSB.by NIKON7772,503 views- 3:26
Gas Block Replacement PART 1by fatboyR69,054 views
- 13:28
AR 15 Rifle Length Gas Tube Installationby fjcaron9,552 views
- 4:13
Incredible Bump Fire! New ATF Approved stock for AR-15 Allows Easy and Safe Bump firingby SG55OVCam237,029 views
- 0:46
STI Tactical 5.0by ssdsurf16,530 views
- 0:25
ar15 .223 deer Bushmaster M4by teddydc267,909 views
- 4:58
Simple Upgrades for Your AR15by millerusaf51,533 views
- 0:22
sight removal/installby phreakmode24,894 views
- 20:10
AR-15 Upper Receiver Build - how to build an AR 15by SoCalPreppers16,981 views
- 1:49
AR Muzzle Break Removalby glocklife7,236 views
- 2:58
Viking Tactics 1 to 5 Drillby ssdsurf4,332 views
- 7:36
Know-It-All: M4A1 Front Sight Assembly Removalby Akododarick8,402 views
- 1:31
AR Free Float Tubes - How to Installby MidwayUSA170,089 views
- 27:52
Troy Battle Rail Install and FSB Cut Downby anamericanstandard2,804 views
- 0:23
20 Yrd Coyoteby 8mmGibbs135,986 views
- 8:44
AR 15 Hammer and Triggerby prokity50,349 views
- 10:05
AR-15 BARREL REMOVAL AND INSTALLATION with MOBILE GUN VISEby wolfdog9765,818 views
- 4:52
AR-15 Muzzle Brakes and Flash Hiders Part 2 of 2by the308capital15,664 views
- 7:52
Smith & Wesson M&P15, Value Priced Citizen Defenderby ZombieTactics8,289 views
- 4:46
M4 Assembly Part1by ssdsurf5,734 views
Im having a heck of a time removing mine. I have a S&W MP15. I keep seeing everyone say to remove them from left to right, but looking at mine, the smaller side of the pin appears to be on the right hand side..not left. I don't know what to do. Ive already smashed my hand with a hammer..Almost threw my upper receiver across the room..then I remember its part of a $1200 gun lol.
Any suggestions?
FEARPaintball 2 weeks ago
@FEARPaintball For some reason S&W has gone with reversed taper pins. I think it was a screw up. In any event hammer them out from the small side of the pin. Use kroil or some type of penetrating oil, put the weapon on a hard or concrete surface and use sharp blows with a large hammer and over sized punch. If worse comes to worse you could heat up the base.
ssdsurf 2 weeks ago
What brand FSB is that? I like it because it has a QD on it. What do you think of the QD vs traditional sling loop attachment on an FSB?
chillywit 6 months ago
@chillywit
This was another persons rifle. The QD is made by GG&G that fits on a standard FSB. I like QD attachments but I do not like this option mounted on the FSB.
ssdsurf 6 months ago