Alert icon
We're changing our privacy policy. This stuff matters.  Learn more  Dismiss

Trailer Hitch Installation - 2009 Nissan Rogue - etrailer.com

Loading...

Sign in or sign up now!
Alert icon
Upgrade to the latest Flash Player for improved playback performance. Upgrade now or more info.
1,435
Loading...
Alert icon
Sign in or sign up now!
Alert icon

Uploaded by on Dec 2, 2009

http://www.etrailer.com/tv-hitch-install-2009-nissan-rogue.aspx

Videos are provided as a guide only. Refer to manufacturer
installation instructions and specs for complete information.

Today we are going to be installing Curt hitch part number 13185 on a 2009 Nissan Rogue. We are underneath the vehicle and we are looking at the drivers side frame rail. You can see we have got three existing weld nuts here at the bottom of the frame that we are going to be using as the attaching points for the trailer hitch. It may be necessary to clean these weld nuts out if there is any road grime or corrosion built up in them. And over here on the passengers side, you can see we have got an existing tow hook that we are going to need to remove. It is held on here by two screws here on the vertical side of the frame and then two at the bottom as well. Once these are removed, they are going to provide the two attaching points for the hitch at the rear side. We are also going to use this existing hole here at the forward side. We are also going to need to remove this small screw here in the middle, which is going to interfere with the hitch sitting flush against the frame.

So, we will start by removing the two hook and the screw from the bottom of the frame. At this point we can go ahead and put the hitch up into position. We are going to be using the new hardware that is provided in the installation kit, which includes the hex bolt and the conical-tooth washer. It may be necessary, if you are having trouble getting the hitch into position, you may want to go ahead and lower the exhaust off of its hangers. OK, with the bolts up in place, I am just going to go ahead and snug them down, and then we will go back and torque them to the specified torque rating. OK, and with all the bolts torqued down, our installation is complete. This will conclude the installation of Curt hitch part number 13185 on a 2009 Nissan Rogue.

  • likes, 0 dislikes

Link to this comment:

Share to:
see all

All Comments (1)

Sign In or Sign Up now to post a comment!
Loading...

Alert icon
0 / 00Unsaved Playlist Return to active list
    1. Your queue is empty. Add videos to your queue using this button:
      or sign in to load a different list.
    Loading...Loading...Saving...
    • Clear all videos from this list
    • Learn more