(NEW VIDEO #19) Magneticmotor1 (Mylow) Magnet Motor

*** NEW VIDEO FROM MYLOW (now call Magneticmotor1 on YouTube) ***

This page is a BACKUP From:
http://www.youtube.com/user/magneticmotor1

For more info see the official project website at:
http://MylowMagnetMotor.com

On March 17, Mylow posted a video that showed the motor starting (with his assistance), then accelerating and coming up to a constant speed.

Be vigilant and be discerning, it is possible some of this videos are fake and that the phenomenon presented does not reflect the factual reality. These videos are for entertainment only. Thanks.

Category:

Science & Technology

Tags:

• Mylow
• Howard
• Johnson
• Magnet
• Motor
• VIDEO
• overunity
• free
• energy
• magnet
• magnetic
• motor
• perpetual
• motion
• impossible
• magnetism

[Arnd2it]

At 7:55 from under the table, and again at 8:20 from above, you can actually see the loop of fishing line coming in from the left side which makes it rotate.

Nice scam MYlow, you managed to get a lot of people to believe in you for a couple of months--for whatever your sick reason was.

[manwar999]

listen to me...the howard johnson motor works...dont stop...but remember keep it to yourselves when you uncover the truth...one thing MYLOW said ''the world is not ready '' can say no more for now...

[slinky460]

At 9:20 He takes the tension off the line by moving the assembly to the left about one inch. The line drops down and then he lifts up the platter. He did about the same thing at the start of the video. Also practice makes perfect. I am sure he went through this process a while to find the best way to do it.

However he had it down real well as until the fishing line was discovered, no noticed what he was doing, except run around and talk. The camera see all it is pointed at.

[SeimenW]

Between 09:25 to 09:30 there is too little time to remove a fishing line just with one ( the left) hand. Mylow would have to pull the fishing line all the way down the bearing housing just with onehand?!?!

[slinky460]

Yes I see it now. Something I noticed too that he made a point to show the area from under the table right where the line was, while stating that there was nothing there. Almost like since he could not see it, the camera could not see it either. But these newer cameras are very good and see everything they focus in on.

My mad has went to sad on this thing. I see one very sick man here. So sick he would involve his wife and brother in this freak show. Along with many other good people.

[manwar999]

hahaha slinky460 you make me laugh... at :50 i see what you mean...mylow makes me laugh to...this whole thing is becoming a dark comedy...

[slinky460]

At 9:20 I notice that you move the assembly to the left about a inch before removing the platter. Just like you did at the start of the video. I think think I now know why. You have to align the assembly with Earths magnetic fields first before you can remove the platter.

Of course it could be to make some slack in the fishing line first before removing the platter so the fishing line drops down. But that would be a trick and you said in the video that there was no tricks. So it is not that.

[slinky460]

"Let me get this over here" why do you have to slide the assembly to the left about an inch first before you take the platter off?

At :50 you seem to say "put that right there" while making a motion with your right hand down to the wood support.

"Put" what? "that right there" Mylow? It is just a simple question to answer.

[slinky460]

Any Fishing line Mylow? Is there any? Are you sure? Really sure? Please tells us the truth.