The School Bell Programmer, (Digital Timer).
Uploader Comments (mrshaneq)
All Comments (5)
-
Try speaking, cause we don't get ur hints by showing the timers...
-
I'm thoroughly confused. All this talk about timers but in the video, you're sounding the bells manually. It would be easier to use one digital timer with multiple on/off times and connect the bell to a time-delay relay that would shut it off after a few seconds.
-
The 2nd Nova digital must be on and plugged into the 1st nexxtech digital timer and the 3rd Garrison digital timer needs to be plug in to the 2nd Noma digital timer and off so the bell won't ring, The 3rd Garrison digital timer's time needs to be a little ahead of time of the time on the 2nd Noma digital timer like 3 or 9 seconds for the bell to ring for a short time like a few seconds and shut off and for 1 to 4 key points above plus the program 1 to 20 and cycle through like that.
-
It also repeats 1 to 4 for every program from 1 to 20, but I will have to be sure the 1st nexxtech digital timer is plug in first and stays on.
So, can you set the timer to go off; say 3 times though a 5 min period. 6:25-6:30 Can 1 go off at 6:25. 2: (a short ring) 6:29. 3: 6:30. Like everyday?
GureckEntertainment 2 years ago
yes it can
mrshaneq 1 year ago
they are connected with a transformer plug in adapter for 12 V DC for the 6 inch wheelock bell and 24 V DC for the 10 inch wheelock bell and that plug in transformer plug in adapter is connected to 2 small extension cord and that is connected into the 3 digital timers that act very similar to the NCH Time Chimes program on the internet that I use in the video of The 6 and 10 Inch bells running from a stereo system upgrade.
mrshaneq 2 years ago
meaning I only allowed to hook up stuff to it from 0 to 1000 Watts, if i use more that 1000 watts it will break. Also it has a 600 watts tungsten so I might only be comfortable to hook things to the digital timer at 600 Watts no more. This video will be similar to the video of The 6 and 10 Inch bells running from a stereo system upgrade but there is some different things the bells are not on a board this time and are not cnnected to the stereo system,
mrshaneq 2 years ago
I use the remote control to ring the bell and I use the buttons on the Timer to ring the bell and when on the clock mode when I press set button and on off button. I can turn off all programs with an X on the clock with unplugging or resetting every thing so the bell will not go off automatically on the timer. I also did continuous ring, code 3 and then march time but march time was a little hard to do. The 3 digital timers only holds up to about 1000 watts,
mrshaneq 2 years ago
the spelling is a little wong it shoud go like this, I can turn off all programs with an X on the clock without unplugging or resetting everything so the bell will not go off automatically on the timer.
mrshaneq 2 years ago