Liquifire with AAEN pipes

this here is a 81 John Deere Liquifire 440 I bought for 100.00,It needed a new ignition coil. I now have 175.00 into the sled. It runs awesome and its good enough for giving my little boy rides. The pipes sound good, not too loud. I also added a gas shock to the rear, so it rides fair for a 27 year old sled. The track is spinning on the slippery concrete floor.

Category:

Autos & Vehicles

Tags:

• John Deere
• Liquifire
• Vintage snowmobile
• Trailfire
• Sportfire
• AAEN

[DLShack440]

was it in that good of condition when you bought it, cuz someone obviously didnt know what they had

[liquifireman]

@DLShack440 They just lost interest in it I guess.

[poopdogsays]

Great sled! I have a set of high compression Kawi heads if you want to bump up the power about 10hp.

I also have NOS jugs too!

[liquifireman]

@poopdogsays I have the 2A heads on it, and I bought 2 new jugs from a guy in MN last year when I went through the whole sled. I got a 83 for 50.00 that had been hit hard in the rear, and I put the engine in mine along with the 108 & secondary, gearing, etc. I will keep you in mind when this one burns down.....:)

[yamaharules163]

awesome sled sad to hear about the pipes though :(

[liquifireman]

@yamaharules163 The stock pipe actually makes more power than the twins. W/O porting, the pipes do nothing but make noise ( kinda miss that ).

[poopdogsays]

@yamaharules163 Pipes and porting isn't really going to do much, maybe a 10hp increase, but the tuning would be a nightmare. The reason the Invaders weren't any faster was because it was already on the ragged edge of what they could do with porting at the time.

I sold the heads last year, but I still have a set of NOS jugs. Check around Kawasikitrax(dot)com It's a Kawi sled forum board. They can help you out. It's been so long since I've been into the Kawi stuff I can't remember shit anymore.

[yamaharules163]

@poopdogsays how much would those heads cost me? im looking at a liquifire and would like to bump the hp up. so far looking at pipes and porting bigger carbs with uni filters

[bookertbrown]

@quincee33 1984 was the year of the Deere :(

[bookertbrown]

@quincee33  1984 was the year of the Deere :(

[quincee33]

@bookertbrown what year was the last for Deere sleds, was it 83 or 84?

[MustangDude21]

thats a super clean sled man

[6string71]

Would you mind sharing your clutch weights and spring combo? Trying to tune a 4/6 motor with the same pipes. Motor is not ported like it should be for max power but trying to get it as good as possible.

thanks

[champion221elite]

That is a very sharp looking sled. Nice find!

[0APS]

I want to buy it

[0APS]

If u are selling that I will buy it