Pulse Motor (LED Lighting) 009
Loading...
18,366
Uploader Comments (kubikop)
see all
All Comments (11)
-
sounds like an old jetta diesel XD
-
Try 24V feed to coil (two 12V batteries), Place AC legs of Full Wave Bridge Rectifier (FWBR)right across your motor-coil SWITCH (also try AC legs across motor coil only, also motor coil and swtich - 3 ways to try)
FWBR DC out goes straioght into 12V battery (try a few in paralell!)
Next, try another swtich on just one leg of FWBR
Turn on-off in "ECHO" pulse-OUT to motor coil pulse IN
Works best with N-S magnets in rotor, and you fire against only North magnets or only South magnets.
-
Watch ktservicescorp 2 latest vid's. There you see he get lot of more output than input!
Loading...
How is this self running? Have you verified that by running it for lets say a week and checked the batterys?
ddanvos68 4 years ago
it is running without me switching the micro switch as in previous videos. Keep watching though I am on video 90 and I am getting there.
I won't claim over unity unless I get it.
kubikop 4 years ago
What are the three massive SLA batteries for mate?
peaps 4 years ago
They are for powering the coil of the motor. I am trying to capture the same amount out again.
kubikop 4 years ago
Hmm. The trouble is, you won't capture the same, you will capture less. Any energy that goes into the system will be either expended in kinetic energy (the wheel), or transferred back into the battery. So I am not sure what you are trying to achieve?
peaps 4 years ago
I am gathering the flyback voltage from the coil to charge another battery in my later videos. They seem to be very efficient.
kubikop 4 years ago