Hydrogen Tap (More Honda Wire) 141
Uploader Comments (johnaarons)
All Comments (11)
-
i became doing my hydrogen cells and i want to know how i drop my amps,i have a 8 plates but my battery is 60 amps how i drop to 15 amps
-
you need to add a hho collection tank for the auxiliary fuel when you make the larger cell
-
At this time ... you need more hydrogen than these cell produce.... I am working on a bigger unit... John AArons
-
Hydrogen and gas... John AArons
-
Thanks...If I can get more people interested in this .... thats great... John AArons
-
Very true, I've been trying to keep up with all your additions, and I've been especially interested in your pulse design, I've personally seen few syetems running on about 12v and .5amps at about 50kHz generating a considerable amount of hydroxy, not to say that you haven't already gotten some great results. Keep up the great work!
-
I did just that.... but an electronic system would be better. John AArons
-
Could I sugest placing a relay on the tank that will start the process with the twin cell active, and then break the circuit with the twin at 30amps, and comes back on at 15amps?
looks Good ! So you are using plates inside the cell. You are using the relay to keep the switch from over load it looks like. Am thinking that you are pulling power from the battery.
Is this your only video on the car. Could not find the other!
youngsinfo 4 years ago
There are about 3 videos...go to my site "hydrogentap dot com"... you can see the cell.John AArons
johnaarons 4 years ago