Tractor Pulling Somerset 2007
Top Comments
All Comments (35)
-
@INTIMIDATOR3FAN Front sits lower, so when the weight of the sled pulls down on the back the weight transfers better to the rear wheels. You don't really want your front wheels on the ground, nor 3 feet off the ground. You just want them barely weightless
-
What's the point of those little tires and wheels on the front of pull trucks? Don't they WANT weight on the front?
-
got any more 250 injectors or know where I can get some I have a 8v92 with 4 turbos. but I am out of injectors.
-
got any more 250 injectors or know where I can get some I have a 8v92 with 4 turbos
-
wat a sound from dat detroit
-
ots optimus prime
-
NTC335,
Very good, now try again with type font off "wingdings"
-
I thought it was per 1000 strokes of injector or fuel injection pump whatever?
so each cylinder uses a litre of fuel every 4000 strokes or every 100 seconds at 3000rpm!!
-
no it does not have a injection pump it has unit injectors that run off of a common rail as the 250 cc they are measured by per 1000 strokes of crankshaft rotation this is a 2 cycle engine so they are measured per 500 strokes.
-
yes im aware of that.
Oh heck, them darn CAT's can't keep their bearings or turbo's or injectors together. Those old Detroits just run and run.
erikih706 3 years ago 7
Beat that daf trucks UK!
trucker85shropshire 3 years ago 2