(RROD) Xbox 360 complete repair

Xbox 360 Red Ring of Death repair Video.

Category:

Gaming

Tags:

• Xbox
• 360
• repair
• Video
• ROD
• RROD
• Red
• Ring
• Of
• Death
• MicrosoftMicrosoft
• rrod
• red
• ring
• of
• death
• Repair
• XBOX

[Rapidfire007]

I apologize for the delay in response as I do not check my youtube account often. To answer your question about 0022 error code. This secondary code is kind of a pain. However, it can be repaired the same way or with a heat gun on 900'F over each the GPU and CPU for about 25 seconds from about 2 inches above the chip. This is going to help melt the solder joints back together easier and a lot better than just letting the system overheat. I have repaired many of them this way and honestly,

[Rapidfire007]

I just repaired one tonight with that exact error code and I have a game running in it right now doing a final burn in.

Thanks for you questions! Hope this helps!

[Rapidfire007]

read the second one down from this and then the middle one.... Ran out of characters....Sorry!

[price031]

hey great video, but how do you "bake" it? are you putting the entire mother board in the oven or something. I'm just curious as to how your cleaning the old compound off the motherboard....

[Rapidfire007]

I am not sure I understand your question? I did not put anything in the oven... What needs to be done, is the solder is lead free and needs to be heated to melt back into position. The way to do that (Somewhat effectively) is to remove the xclamps and power on the unit for a few seconds after removing the heatsinks and the compound. As far as cleaning the compound off of the chips, I use citrus adhesive remover and alcohol.

[Rapidfire007]

this seems to be best effective for me. I then use AS7 (Arctic Silver 7) with a very thin (Paper thin) coat. Once I have this heated, I lightly tighten the screws until they are semi snug but, not too tight; otherwise you will damage the chip sets.

From there, you will have to mess with the system to find the best configuration that works. it can be a little tricky at first to get the system back online.

thanks,

Rapidfire007

[ps3fanatic619]

I don't kno what I'm doing wrong, I put a little more then enough on the gpu and CPU and it didn't work, now I have like just enough and i'm waiting for it to cool down, if it doesn't work what should I do

[frankieandpeggy]

yea, what suggestions do you have for red ring with error code 0022??

[kakalala21]

Please help, iafter doing this, i get 3 red rings, then immedietly 2 and the fans turns off, i have checked if the motherboard is bent which it is not, i used thermal grease zm-stG1, what can i do?

[Rapidfire007]

Well, unfortunately the black screen is a precursor to the RROD. I think that best thing to do is 1.)do the repair or have someone do it. Or 2.) Purchase a new xbox.

The only way to make the screen come back is to do the X clamp mod. Or, super heat with a towel like the morons on you tube. (I honestly do not suggest doing that.)

Hope this helps. Let me know if you need any help and I will be happy to assist.

Thanks,

Rapidfire007

[garethnorthwood]

Hi, I have no ring of death, but a few weeks ago found that my screen was going kinda blurry when playing games. If i gave the xbox a tap on the side it would go back to a normal perfect screen (like i was knocking something back into place). But unfort a week later i now have a black screen showing nothing but can still hear everything working. Like i say, theres no red lights on the console & have taken the thing apart, but to be fair. Havent a clue. Any help would be much appreciated