Adjust rear shock spring on MX bike with no special tools. Yamaha example.
Loading...
Uploader Comments (Johnnysshop)
All Comments (111)
-
@Johnnysshop is it cheap?
-
@01Dupie Have you tried to adjust all the settings out (counter clockwise). If so, how does that feel?
-
revalved? I am new in this I just had my rear shock rebuilded we also did all my bearings and still my rear shock sticks I have turned the settings on the shock and still the bike if I only press it it doesnt rebound at all. Any ideas? how to explain ok my rear spring when returned from rebuild was fatened in plase right to the bottom this in my terms almost fully compressed could this cause no rebound as well by just pressing on the seat
Sorry for all the questions just want to fix her
-
@01Dupie Correct. You' can see how it feels with stock but you'll probably eventually want to go up on the front and rear. Stock that bike has .44kg front, 5.2kg rear. For you're weight you'd want at least .49 front, 5.6 rear. With that much change you'll want to get them re-valved as well.
1:41
Part 47: Motocross bike. Adjusting chain slack. YZ250Fby Johnnysshop24,338 views- 2:43
How to check oil pressure on a MX bike (motocross, dirt bike, etc). YZ250F Exampleby Johnnysshop12,644 views
- 5:36
Motorcycle / Dirtbike How to Adjust Rebound and Dampingby Johnnysshop16,685 views
- 9:09
MXWrencher.com - How to Set Your Suspension Sagby MXwrencher25,724 views
- 0:45
What is wrong with my CR250R????????by rebound9230,180 views
- 1:38
Bike Race Sag - MMI Tech Tipby UTIGarage1,355 views
- 0:49
Motorcycle height adjustmentby wetbro10,151 views
- 2:35
The correct way to tighten your dirtbike's front wheelby rideroftheweek21,641 views
- 4:16
Factory Connection Instructional Video :: Changing a shock spring on a KYB shockby FactoryConnection27,350 views
- 3:23
How to set the sag on your dirtbikeby rideroftheweek12,651 views
- 0:07
250 yz accelerationby lesvideosalionel12,962 views
- 3:32
Part 79: How to install grip (handlebar grip) safety wire. YZ250F example.by Johnnysshop33,317 views
- 2:45
how to change your shock oilby traxxasrc112,262 views
- 1:11
Ohlins Shock Preloadby Ohlinsusa14,447 views
- 12:02
YZ250F complete walkaround with list of upgrades. ASV, TUSK, Works, Lightspeed, Yoshimura, etc..by Johnnysshop30,564 views
- 2:19
Tip to keep your forks moving freely after cleaning.by rideroftheweek16,592 views
- 2:16
How to install a Dirt Bike Graphics Kit on a Motorcycle - Chaparral Motorsports Tech Tip #10by chaparralmotorsports20,486 views
- 10:10
Part 68: Complete motorcycle carb rebuild. YZ250F example.by Johnnysshop21,051 views
- 2:54
Ricky Carmichael - How to Whip / Comment Faire un Whip - Motocrossby MondialMX628,514 views
Does this work on a Suzuki 85
SCOOTTILLUPUKE 3 weeks ago
@SCOOTTILLUPUKE Yes.
Johnnysshop 2 weeks ago
what should i do if some of the oil came out of that bolt that surrounds the rebound screw?
is there any way i can refill it or do i have to pay to get my shock redone?responses will help!
thanks
thebradman1000 1 month ago
@thebradman1000 You'll have to get it serviced :(
Johnnysshop 1 month ago
does this "bottle" near the suspension contain gas? and if it empty, could it be reloaded?
teo5dokos 1 month ago
@teo5dokos Nitrogen. Yeah, you can have it refilled at a shop.
Johnnysshop 1 month ago