Stirling Engine
Loading...
Loading...
1,706
Loading...
Uploader Comments (yawho4)
Video Responses
This video is a response to How-To Tuesday: Stirling Engine demo from Volume 17
Loading...
7:04
Megan's Stirling Engineby mamccarthy226,188 views- 1:27
LTD Stirling engine JB Weld piston castingby QuadUnit15,134 views
- 1:55
stirling engine LTD typeby mikruson1,144 views
- 0:55
solar powered stirling engine.. free energy¡¡¡ clean energy¡¡by pepini115,850 views
- 1:33
DIY STIRLING ENGINEby 1crazyfocker15,340 views
- 0:20
Solar Stirling Engineby stirlingfreak465,996 views
- 5:05
Stirling Engine Experimentby checkmatedeepblue119,695 views
- 1:12
PM Research Thinking Man's Stirling Engineby EeeebeeeE1,797 views
- 1:02
Large Stirling Hot Air Engineby Valvechest43,977 views
- 9:56
Making an LTD stirling engineby pryonubby66,865 views
- 1:00
Coffee cup Stirling engine (making of)by wh1stl3bl0w3r36,701 views
- 4:22
Stirling Engine, Tin Can Walking Beam, T. Shirah, July 2008by shirah60110,470 views
- 2:35
Homemade Stirling Engineby 30GB9,972 views
- 0:23
Beer Can Stirling Engineby mjblanck23,848 views
- 3:16
LTD Stirling Engine (Build photos & Running Video)by mowerofdoom10,775 views
- 0:53
Online build...Stirling engine from input and tips.by 441rider34,473 views
- 5:14
The Stirling Engine Projectby StatusProductions181,933 views
- 0:55
Make Magazine Joule Thief Exp, New and Improved Versionby chilliqueen20072,725 views
- 1:24
Stirling Engineby Ironfist5005172,718 views
i tryed building this but it won't work
i think it might have to do with the displacer being too heavy, and help?
Neztoro 2 years ago
Did you use foam board for the displacer? You need to do a good job in counter balancing the displacer and test this by spinning the fly wheel. I also used two fly wheels one aluminum and one CD and that also helped.
The biggest issue I had was air leaks. So I tested the air tightness by blowing air into the engine with soapy water around all the joints to identify any air leaks. I had to seal the engine using silicon seal and not hot glue as in the original instructions.
Hope this helps.
yawho4 2 years ago