MOOG 6DOF motion Platform
Loading...
Loading...
4,193
Link to this comment:
Share to:
Loading...
- 0:436-DOF Stewart Platformby darragjm35,353 views
Featured Video
- 1:34Three Axis Motion Base in Tandum for Simulatorby servosandsimulation5,398 views
- 6:33Moog Flight Simulationby MotionControlVideo1,144 views
- 1:19Moog 6DOF ElectroMechanical Motion Base Utilize...by MotionControlVideo1,119 views
- 1:11Hexapod systemsby cams30354,107 views
- 1:47Free Software for Six Degrees Of Freedom motion...by lolitech113,049 views
- 0:20Stewart platformby cams30325,990 views
- 1:59Flight Simulatorby MotionControlVideo273 views
- 1:09M-4 Flight Simulator in Actionby celika1231,230 views
- 2:23motion platform simutrans a320by simutrans4,658 views
- 2:45Electric motion platform with three degrees of ...by ethoendel218 views
- 0:40motion test 1by wannamakeone9,599 views
- 1:22Aeronautical Systems Engineering (ASE) full mot...by aseflight2,405 views
- 1:14rFactor 3 axis motion platform MSE Simulationby MSEsimulation35,117 views
- 0:066 DOF Motion of the 8' Atlas Simulatorby andrewarthurdobson1,303 views
- 2:30Moogby DesignWorldVideo402 views
- 1:27Hydraulic F1 Simulator - Hydraulic motion platf...by mstanek8248,417 views
- 0:48MOOG Lean Controlby CarisLab418 views
- 2:286DOF motion platform (Full size)by ngidalov15,978 views
- 0:46Motion Platform for Flight simulator by Elsaco ...by milapatek8,905 views
The platform has a non-linear response curve as you have noticed. If you want to operate it over the entire range, you will need to model the behaviour and use that to control the platform. For my application, I linearized the equations about my operating point and then used the linear model to control the platform. Otherwise the control theory gets a little hairy!
mmakrzem 2 years ago
hi,
very nice motion simulations.
i am working on the same model from moog.i had an issue regarding the motion limits of the hexapod.
As mentioned in the manual, the platform has +30/-30 deg/sec limits for the angular rates.but at my end, the response with in this range is very low in amplitude, however when i give angular rate of 300deg/sec then the response becomes apparently good.
any thoughts on this?
thanks
pyrrhicpk 2 years ago