Taig Lathe Y-Axis DRO
Loading...
Loading...
1,980
Loading...
Link to this comment:
Share to:
Uploader Comments (iceblu3710)
see all
All Comments (1)
-
Cool. I'm currently doing this setup with my Taig Mill but am concerned about chips, dust etc. Do you find this to be a problem.?? any advise on how to keep the scales clean. ?
Loading...
- 0:24
Micro milling on a Taig lathe.by DoctorHerbert4,121 views
- 1:45
Digital Readout Scale Mount 2by CncObsession1,883 views
- 0:21
Taig digital rpm readoutby happymark18051,653 views
- 4:58
Broaching on a Lathe or Machining Centreby MTSdriventools74,975 views
- 0:18
poor mans DRO for Taig micro Latheby ajawam2,031 views
- 6:18
ACER E-lathe™ Engine Lathe with Newall CSS DROby acervideos2,178 views
- 0:28
Caliper2PC - Fast Mode Read Outby caliper2pc1,632 views
- 5:24
ENCO 13" x 40" LATHE w/ 2AXIS DRO SCOTT-NJBby industryrecycles980 views
- 1:11
Harbor Freight 4" x 5" Micro Latheby homebuiltchopper50,320 views
- 26:01
Taig Lathe Diary - Chapter 2by ray59613,206 views
- 5:01
Milling cooling jacketby Titanis20002,322 views
- 4:38
SINO DRO TALK THROUGH SETTING UP FOR USING P.C.D FUNCTIONby meanfazer7,721 views
- 2:30
9x20 Lathe CNC Conversion - initial testing part 2by dareposte19,024 views
- 0:18
Taig lathe & Microscopeby agsatoda2,106 views
- 4:42
Pipe Making: Tenon Turning and a Stem Inlay done on the Taig Metal Latheby tylerlb2,823 views
- 6:11
Lapping Cross & Compound Slide Lathe Waysby saunixcomp18,320 views
- 3:10
taig millby john2478757 views
- 9:57
"Machining a model Steam Engine crankshaft."by johnsimmance10,923 views
- 5:34
Machine Shop Training: Lathe Picking up a Thread ATI Lathe #13by AmericanGunsmith33,317 views
** on the mill you might want plexi
iceblu3710 2 years ago
Hey! Im in the process of making a complete DRO setup for the Taig and will post a better video and a link to my blog on building it.
This was a proof of concept and only accurate to ~0.003" I have a 3/4" paintbrush i clean off the cartridge with between tool changes so chips are not a problem for me.
On the lathe you might want to bend some 1/8" plexi over the entire scale so if you do any sort of cooling they will stay dry
iceblu3710 2 years ago