TSI Turbo Manifold
Loading...
Uploaded by TheSentraChannel on Apr 19, 2009
A view and description of TSI's turbo manifold for the GA16DE as well as problems associated with it.
For copyright purposes, the song in the intro is "Your Love" by the Outfield.
Link to this comment:
Uploader Comments (TheSentraChannel)
All Comments (8)
-
i need alot of questions answered could you email me
-
i have a 1999 nissan sentra gxe limited edition 1.6 will the tsi turbo kit fit the same way
-
I found out what one problem was since then: my S-AFC 2 TH-point adjustment is completely off. It has been that way for quite some time now, apparently. It should be as follows: Low-Throttle 25%, High-Throttle 35%, not 67% and 6%. Craziness.
-
This was very interesting Biscuit. My GA16DET has lost a bit of power recently. I suspect it has a manifold gasket failure. I drove it yesterday while putting the car away for Summer storage though, and it sounds like the manifold gasket failed and I am losing boost. I won't be taking it apart until December to find out though. We probably should be retorquing our manifold bolts from now on, especially that tough one to get at.
Mike
-
Good video man, I have personally never had this problem using a t-20, at least not that I have noticed.
2:50Team IOD intro 200sx SE-R Turboby joshsr202,155 views
- 0:21Nissan Primera 1.6 SLX (9000Rpm)by joaoduarte304,453 views
- 1:56GA16DE+Tby oderusfan1,039 views
- 4:17GA16DET hosesby TheSentraChannel12,687 views
- 0:16Vw Golf 5 TSI 122KM PROBLEMby itd04124,681 views
- 5:01Nissan Primera Owners Club (NPOC) - The Girlies!!by essNchill12,057 views
- 3:10PTK Turbo kit installby psaltiveri270,961 views
- 2:53Polishing a 2g GSX 4g63 Turbo cylinder head & m...by Jafromobile22,678 views
- 2:33Turbo R6 Previewby imprezatt63,989 views
- 1:03Nissan Sentra SE-R Turboby xtremejav186,056 views
- 0:28Sentra B11-Turboby macakin9,695 views
- 0:24Glowing Turbo Manifoldby 032787170,554 views
- 2:12Diesel Upgrades; Aurora Turbo & Pulse Flow Exha...by InlineSIX2420,748 views
- 1:56B11 Turboby jacknoxz8823,702 views
- 2:56Nissan 200SX turbo awesome blow-off soundby spyd3rx1,527,750 views
- 0:19GA16DE vtc nismoRasby nismoras9,197 views
- 0:18Trinidad BlueIce's Nissan B13 Sentra vs B14by SinisterAudio16,871 views
- 0:11b14 nissan sr20 na swap with t25 5psiby tayasdad4,673 views
- 6:36B14 Ep. 9 Your Consult Port and You...Dataloggingby TheSentraChannel1,873 views
have you used a straight edge to make sure neither the manifold, or the head ports are warped?
and as for the turbo weight issue, the GA and QG TSI manifolds are the same manifold. QG18DE kits use T25s
sdfE36 2 years ago
I haven't checked it... but you could be right. Next time I pull it off, I'll check.
TheSentraChannel 2 years ago
i have a jgstool manifold for my ga16, how much dirrecence doyouthink thier is between the two? jgs also is a log type manifold pretty much free flowing. also inoticed the flange on the manifold isnt directly in the center. is that why the tsi manifold has that divider in it.
wwolf771177 2 years ago
I believe that is the reason for the divider. If you've ever seen a stock CA18ET or CA18DET turbo manifold, they are so off-centre and have the divider for better flow.
TheSentraChannel 2 years ago