new Joe cell design hydrogen generator

This is a new try at making hho. It works very well at low current and amps.

Category:

Howto & Style

Tags:

• hydrogen
• hho
• joe
• cell
• experiment
• technology

[SGiHunter]

Valves don't work because the implosion sucks open the valve. So how do you stop HHO from imploding at 66% hydrogen and 33% oxygen.This is the implosion ratio. You change the ratio.

You add some air to the mix or other inert gas. Then you will get an explosion which is what these valves are designed to work with.

[onecraftydude]

My check valve has worked repeatedly. There is a suction created, but that is after the flame extingueshes. Silicone mat will not deform and leak like rubber products do so I use that for the valve disc. Small check valves for auto's also work, but only a few times before the deform and leak or blow apart. Bottom line is this: ALWAYS use a BUBBLER and check valves when igniting hydroxy. The less volume the smaller the explosion.

[onecraftydude]

Joe cell is just a type of cell design. I can call it whatever i like, and i am not spreading disinformation. That cell makes hho/ hydroxy/ browns gas/ hydrogen/ oxygen. I put the video out there for experimenters to copy. Do you have videos? Maybe you could tell us all how its done? I am doing my part to share my findings and i am not going around telling others that their design is named wrong. My joe cell generates hydrogen just look at the explosion.

[marthale7]

Bronze wool my friend, Check out Sirhoax's videos tested and works ( watch him check them )

[onecraftydude]

I have not had any luck with bronze wool. I sometimes use it to slow down bubbles inside the bubbler. If you pack the wool tight enough to stop the flame it will slow the flow.

[baw1baw]

I had the same result without a bubbler and the cell top ended up embedded in the kitchen ceiling. You need a fishtank airstone right behind your torch. There are some great flashback arrestor designs on the site. Put it as close to the flame as you can. Onya crafty, my ears are ringing in sympathy.

G

[onecraftydude]

airstones will not stop the gas every time. The water vapor in the airstone is what quenches the flame. A bubbler is a necessity. But a better flashback arrestor is easy to make and i will show you how. More to come.

[skingirlrandi]

Don't feel to bad you are still HERE after all

[clackdwack]

lol

[ehnriko]

I second the motion!

More Power to you!

[MMadmike]

Safety Glasses!!!!

[fuckingnewguy]

2 things:

1. Where are your F-ing safety glasses?

2.  A Joe cell is not used for generating hydrogen. So congradulations on doing your part to spread disinformation. Change the title of your video to prevent confusion. Just call it a HHO Generator even thought you are probably using a concentric pipe configuration like the Joe cell uses. Thanks

[copleygsxr]

you need to install a flashback arrester or a flame arrester do not use steel wool use fine bronze wool check out my video on this thanks

[ztfizzy]

great video for explaning what not to do.;)

I have come close to this but instead i used a baloon and lit the open end on the cement floor.