(2 of 2) Worlds first 3800 supercharged 99 sunfire GT!

Worlds first 3800 supercharged 99 sunfire GT! That we built here at my shop "All Design customz" With the help of Double z, and Raven motersports! For more info on my car/engine swap go to:
http://www.cardomain.com/ride/758239

Category:

Autos & Vehicles

Tags:

• sunfire
• 3800
• supercharged
• cavalier
• raven
• air
• GT
• tippi989

[pussyforlife]

nice and sick job on the sunfire. the car looks awesome and if you want 2 make it go really fast then by you put that northstar v8 in the car she will scream for more power. add a vortech HIGH-OUTPUT twin-screaw supercharger, nitrous oxide, nitrous bogger system, and bigger supercharger pullies and she WILL defenetly be a real screamer. props on the good job 2 the car.

[tippi989]

thanks bud, and im gonna make a v8 jbody in the future. keep in mind that a "smaller" pulley will make more boost not a bigger one. but thanks again man

[jspoo23]

is it fast

[tippi989]

its pretty damn fast, i also have a mustang gt and it smoked it, but im still working on it, and its getting even faster!

[Naturalhit]

An engine like that plus a light weight car... that's going to fly.

[norcobigfootrider]

@pussyforlife Just for the record, a northstar V8 would require major modification body wise to fit in a cavalier, it wouldn't fit between the strut towers. One swap on the cavalier i've always wanted to try and would still one day like to do is a 350 rwd... it's do able but a lot of work and fabrication....

[The05ZX10R]

How can you say its the worlds first I'm sure you didn't personally check every sunfire in the world to see what's under the hood.

[KAL3P1]

plz post a vid of a fly by/engine sound/or at least a drag run.looks preety good but i wanna hear this beast and see how good she goes

[Blazen8gsx]

northstar perhaps?

[iwttm03psiab]

Post more vids.. PLS!!

[Blazen8gsx]

I'm not sure what drive train I what to go with yet but it's probably going to be rwd I think it will have better cornering and besides the rear suspension isn't independent anyways so it's the same than a rwd axle. Fwd drive train it would be a bicth tring to find the right cv joints and bearing hubs so most likely im going rwd, by the way the car is 2000 sunfire gt convertible.

[tippi989]

hey man, there is room (with alot of cutting and you have to box the unibody) a wire harness and shift linkage are the least of your worries, i know a guy who did it. are you wnating rear or front drive? there are a few trans opitons you can pick from. But it is possiable, and will cost alot!! good luck bud.