honda odyssey transmission rebuild part 7

the finish line on the rebuilt 2006 honda odyssey 5 speed automatic, and make sure you watch out for the 3rd & 4th clutch pressure switch, they can be damaged in the parts washer so take them off and put them in a safe place.

Category:

Education

Tags:

• DSC-W290

[FLFelon]

How did you keep the whole assembly from rotating while you where removing the hub nuts? It seems that the entire thing would rotate if not arrested properly. I am going through the same thing and would really like to know. My code is BAYA/MAYA for a 04 accord. Thanks

[weldean46]

@FLFelon you need to unstake the nuts first, then use a 1/2 in impact gun and a 35mm socket, if the gears still move use shop rags or towels and jam it in between the gears to lock then from moving.

[h23sirlude]

great video on rebuild. where are the external filter? can yo show it. thanks

[weldean46]

@h23sirlude the external filter is on top, you can see one of the cooler lines going to the back side of it, it is on top and rear of unit, thanks for checking out my video.

[DamItzGettoRiGG]

Thank you sir for posting these videos, it gives me a good idea of what I'm in for. Also I wanted to know if it would be possible to tell me where you source your replacement parts for overhauling these transmissions? Do you get everything from Honda or do you order a "Master Kit" from an aftermarket supplier? I used to work at a Honda dealer myself but we always would just install a reman. unit when we had an auto with a shifting problem. I've overhauled plenty of manual units, now for at's??ah

[weldean46]

@DamItzGettoRiGG check out transtar trans parts inc, they have every thing you will need

[FLFelon]

Thank you for the help. I will have to order a 1/2 drive 35mm the biggest I have is a 32mm. I have just pulled the subframe along with the transmission and I just opened the case. Everything is very clean and fluid is bright red...However, my torque converter bearings move over 1/2 inch in any direction. I think I found my problem but will still do a complete tear down and replace all of the soft parts. Thank you for these super helpful videos. Our trannys are very similar.

[weldean46]

@lamborghinimeany yes i do then all, thanks

[lamborghinimeany]

Dude, that was awesome. Do you also rebuild the B7XA Honda transaxle?