RGB LED's Color chasing lights 24 programs

Color chasing lights. These LED strips comes in 5 meter rolls (16 foot). Each roll can be cut every 5 inches depending on your application. The strip is ½ inch wide and has 3 RGB LEDs every 5 inch segment. Each controller can control 10 rolls. When connecting rolls end to end you need an amp every other roll. Its best to connect the strips directly to the controller and not end to end. Depending on where you connect the strips either at the front of the roll or at the end you can make the lights zig zag or sequence in one direction.
F24 =Sequence right to left Green to Red
F23= Sequence Green Left to Right and then fade
F22= Fade Yellow to Green to Aqua to Blue to Purple to Red
F23= Sequence left to right Green
F21= Rainbow left to right
F20=Rainbow right to left
F19=Sequence Yellow/Green right to left
F18= Sequence Blue left to right
F17=Sequence Green right to left
F16= Sequence Red left to right
F15= Sequence left to right Red Yellow Green Aqua Blue Purple
F14= Sequence right to left Red Yellow Green Aqua Blue Purple
F13= SAME AS F14
F12=SAME AS F15
F11=SAME AS F20
F10=SAME AS F21
F09= Flash and change color, Red Yellow Green Aqua Blue Purple
F08+ SAME AS F09
F07= White
F06=Purple
F05= Blue
F04= Aqua
F03= Green
F02=Yellow
F01=Red
F00=Display all colors and patterns

Category:

Science & Technology

Tags:

• RGB
• LED
• SMT
• 12volt
• Contoler

[grantwes]

A company in San Jose ca called Vastech

[88449214]

@mikeskiw yeah can these lights pulsate or whatever

[pricklypearworks]

Hi, from where can I buy such light ??

[tommurphy73]

Where can these light strips and controller be purchased?

[mikeskiw]

I wanna see those lights dance to the BEAT!