LI 125 Lambretta scooter restoration
Loading...
Uploaded by camrabel on Sep 28, 2009
A little video I put together showing the 5 months it took to build my scooter. Good fun to do, but wouldn't do it again in a hurry!
Music by The Small Faces. No copyright infringement intended.
Uploader Comments (camrabel)
All Comments (9)
-
Yup cool! :-)
-
Someone near me has one of these is WAY worse condition, that he found in the trash, he wants $350 US for it. I think he's insane. I took apart my Honda Rebel completely and restored it in the same way. How safe are these to drive, I've seen people skid and fall off them? Also whats your top speed and mpg, and where are you finding your parts, on ebay?
-
Great job mate. I have a Lamby 150 that i recently restored.
-
Hi, great job m8, had all my stuff blasted and etch primed for £100. (bargain) Then the fun stuff, filling rubbing down, flatting etc. Paint really makes the scoot and a poor job will show and really p*ss you off. Get what you can afford and ask your mates for recommendations. £450 should get you a good job done.
-
Not bad. Shame about the GP rear light though.
100 videosYouTube Mix for The Small Faces- 3:01
Lambretta's first run after forty yearsby tombretta16,028 views
- 1:54
1978 Lambretta GP200 (SIL) scooter - Part 1by purirhn5,321 views
- 2:30
1963 Lambretta Li 125 Restorationby ampack7,184 views
- 1:52
Lambretta LI 150 III series restoration finally finished.mp4by verdi2921,328 views
- 3:38
lambretta gp 200by ilsonboy113,158 views
- 4:59
A CLASSIC SCOOTER RESTORATIONby ADMIRALSCORNER2,226 views
- 2:22
NEW 2011 LAMBRETTA SCOOTER @ LYNX SCOOTERSby 732heu17,974 views
- 1:59
Lambretta Scooter Li 125by dwalters20014,274 views
- 0:56
lambretta sx scooterby popreduk17,256 views
- 1:19
Stretched Lambretta Scooter Flop Customby FlopCustoms3,554 views
- 1:19
Quadrophenia Jimmy Lambretta Replica scooterby Lambrettist19735,683 views
- 0:49
scootRS Lambretta RB22 restorationby scootRS24,473 views
- 2:32
Lambretta LI150 s3 restorationby ejfhaarhuis2,134 views
- 0:42
Lambretta GP150 unrestored 4by andymuza883 views
- 2:43
Lambretta Restoration 1963 li series 3by fairman611,116 views
- 0:55
lambretta restorationby lambretta1,057 views
- 4:13
1963 Lambretta Li 125 Serie 3 Restoration Project Part 2by PhildeSIG4,960 views
- 0:32
Lambretta LI 125 Series 1 1961 originalby eng4ger24,835 views
- 1:54
Puch Scooter Restorationby redsonic4442,948 views
- 1:26
Lambretta Scooter Exhaust Gas Temp Gauge EGTby LambrettaFan2,097 views
hi - nice job, -did you do the paint job yourself or what,, - just wondering if aerosols would do a decent job - & how much, roughly, is the cost of getting all the panels etc sandblasted. Cheers
ShenegarTrott 1 year ago
@ShenegarTrott
Hi, yes I sprayed it myself using aerosols, you just have to take it slow and put on lots of thin coats so it doesn't run and then plenty of lacquer. I was working on a budget but if I had the money I would have had a proper job done although it turned out OK. After being sand blasted the metal is really porous and it did take a lot of tins of primer and paint to cover it, I think the blasting cost around £120, try and get someone who knows what they are doing. All the best.
camrabel 1 year ago
another lammy on the road... well done!!
lammydave 1 year ago
@lammydave
Thanks, I haven't quite reached the standard or numbers of your collection, but I hope to do another, thanks.
camrabel 1 year ago