scrap wire stripper / chopping machine
Loading...
Uploaded by joshtrue1 on Jan 23, 2009
Used system (updated) for separation of copper or aluminum from plastic insulation.
This machine will chop and separate telephone wire, Romex , aluminum bx, THHN, XHHW, etc.
No water is used in this process.
300-500 lbs/hr depending on wire and screen size.( ex: telephone wire will take longer because you need a smaller screen to separate the finer wires).
-15 hp Baldor chopping motor
- 5 hp Baldor blower motor
-1 hp Baldor Copper separation/fan table motor
-2 hp 110v dust collector (included)
240/480 40 or 60 amp main breaker.
All motor controls, switches etc. are included.
Built on frame with wheels for easy moving.
6- leveling 1/2" legs for leveling support.
4 different size screens to chose from.
We can custom build any wire chopping system to your specs. 300 lbs up to 10000 lbs/hr
please call 860-670-1890 (serious buyers only) email us at josh@ctrecycles.com or check us out at www.ctrecycles.com
Link to this comment:
Uploader Comments (joshtrue1)
All Comments (6)
-
You need to scrap a hell of a lot of wire to pay for that baby.
There's a bunch of different manufacturers making them.
That thing is at least 5 grand probably more.
My guestimate says you'd have to strip between 5 to 10 thousand pounds of copper to pay for that thing, depending what they make per pound.
-
Seperation by cyclonic action. Lighter plastic, heavier copper. Wonder what the chopper/grinder looks like? Great way to re-cycle communications cable for maximum return.
-
does this machine separate by spinning or by floating the plastic in water?
-
where do you buy/how much/
-
was the other side aluminum? what would happen if you put a whole piece of MC
2:17
WIRE STRIPPER CABLE STIPPER COPPER RECYCLE SCRAP WIRE EconoStripby cncdieman72,866 views- 0:25
Wire Zipperby sts692toni28,493 views
- 2:18
JZ-DX series Waste Copper Recycling.mp4by erhaigudeng7,050 views
- 1:49
Wire chopping system NEW! over 400lbs/hr built in the USAby joshtrue16,223 views
- 3:10
Strip-Tec 3000 - Industrial Cable / Wire Stripperby JMCRecyclingSystems112,949 views
- 6:43
drill wire stripper scrap wire stripperby joshtrue1115,027 views
- 2:07
Homeade wire stripperby robraykino81,989 views
- 3:27
Wire Stripping machine / Wire Stripper machineby TNTTooling13,199 views
- 1:36
SDT Bench Top Automatic Wire Stripping Machine, Hooks Up To A Drillby SteelDragonTools27,420 views
- 3:52
Homemade Scrap Copper Wire Stripperby jay19LM58,471 views
- 1:41
copper wire stripperby copperwirestripper9,113 views
- 1:38
WL100 Manual Wire Stripperby newmantrading41,898 views
- 1:14
how to strip copper wire for scrapby pm5k0035,800 views
- 3:50
THUNDERHAWKby CopperRecovery14,127 views
- 0:43
Model CS880 New Firec Cable Stripperby rossmachinery4,439 views
- 3:46
big & medium motor powered scrap wire stripperby joshtrue140,632 views
- 1:58
WIRE/CABLE STRIPPER - 1 866-679-8783 or wasteequipment1@gmail.comby fasteddie197110,850 views
- 1:17
Heavy duty High voltage copper wire beeing preshredded by a single shaft shredderby joshtrue117,026 views
- 4:38
Stripping copper wire cheap and easyby jouwnaam55,550 views
- 1:50
Scavenger III recycle Wire Stripperby blube1915,587 views
no, it uses only air as a means of separating the copper from the insulation by "specific gravity technology"
joshtrue1 1 year ago
If you put aluminum mc into the system, the aluminum and the plastic will come out the back and the copper will come out of the front.
You can then recycle the aluminum and plastic mix back onto the table with a different setting to separate the aluminum from the plastic.
joshtrue1 2 years ago