Safetran Signal Interlocking tests with "Trigger multiple signals" rule for Trainz 2009

Slladnar my fictional class II railroad company in Johnson City (the name of this route) is conducting tests with UP and Amtrak on the Nostrum Junction located just north of Johnson City. Amtrak has agreed to use one of their fleet units on this test run.

A group of Slladnar rail workers are standing next to a former fleet of Amtrak's P32-8WH now apart Slladnar freight line are inspecting the safetran's interlocking 8 aspect signal. The scenario today is to see how fast the triggers will throw a red for the intersecting track as a high speed train traveling at 75mph passes through the interlock. If successful the signal here should throw a red until the highspeed train has cleared the interlock completely. These tests will give the lower priority/speed train (Slladnar) and a high speed train time to operate through the interlock in a safe manner and for the FRA approval. Further tests will be conducted to increase the time elapse between the trigger and signal . So far the signals and triggers are working perfectly.

Slladnar name and design is my own creation.

Trigger multiple signals rule can be downloaded from the DLS.

Signals, Tracks, and Locomotives were from www.jointedrail.com

This was done through TS2009 on my route, the video was captured by Fraps.

Category:

Gaming

Tags:

• Trainz
• 2009
• Railroad
• P32HW
• Loco
• Amtrak
• Crossing
• Route
• Johnson
• City
• Jointed
• Rail

[MoeJae86]

@tylerstrains2012 You can get the rule from the download station, put in the search box.

Trigger Multiple Signals

Created by maggs, Download it and commit it to trainz.

In surveyor mode you will need to place the green T shaped triggers on the track near the interlock, usually one per track. But for faster or higher priority trains I place two or more on either end of the interlock so that it will the faster train the "right of way".

Then go under rules and add rule that's were the TMS is.

[tylerstrains2012]

where can i get that rule and how do i set it up? I tried just putting the signals in but it didnt work. how do you use the interlocking signals from JR with the rule, and if you know. what is the JR signal offset thing (orange arrow)