X58A-UD5 Motherboard LGA 1366 Boot # 5
Loading...
Uploader Comments (bigjolly31641)
All Comments (14)
-
What's max stock DDR3 memory speed you can use without OVERCLOCKING?
-
what RAM u running, I have BSOD Problems running triple channel (OCZ3P1333LV6GB) - Fine with one or 2 sticks, 3 no go :S
OS = Windows Ultimate 64 bit
any advise would be a great help
Dan
-
No air slow? lol, but nice parts! great vid!
-
is it compatible with 4gb of dominator gt ?
-
overclocking on a stock fan?
-
its normal for the ex58 northbridge to run between 40-50c+,dont forget if your using dynamic energy saver you can enable all the mb phase led's which light up according to cpu and ram loading,dont use easytune to overclock with it will freeze up your system,always do it in the bios and use coretemp or realtemp to take temps from the cores not the heatsink as they will be 5-10c hotter than what easytune tells you
-
Ever since I went with a PUSH/PULL with the Corsair H50 it has never gotten hot again
2:30
Gigabyte GA-EX-X58 UD5 Kühlungby tesafilmfestplatte1,571 views- 7:54
X58A-UD5 Motherboard LGA 1366 Unboxing #3by bigjolly316414,301 views
- 2:08
new computer!by diablo1653,954 views
- 7:10
Corsair TX-750W ATX Power Supply Unboxing #1by bigjolly316411,401 views
- 2:02
HG - Computex 2010 - Gigabyte GA-X58A-UD9 Motherboard with Cloud OC In Actionby hypergearmagazine3,571 views
- 1:05
(1 of 3) Exterior, Raven X3, Custom Built by Jacob, Computer DNA Technology (CDNAT), Chicagoby worldclassleader4,822 views
- 4:52
Silverstone Project File #1 Ver. 1.0 Silverstone Raven RV01 to RV02by Scorpion7substance6,586 views
- 1:32
GigaByte X58A-UD3R Problemby TheGamingDude235,411 views
- 2:34
Watercooled Core i7 920 D0, Evga GTX 285 SSC SLi in the Corsair Obsidian 800Dby MarvelShockeR1,379 views
- 2:31
Silver Stone Raven RV01 Upgrade 2 GIGABYTE GA-X58A-UD7 Mobo Intel Solid State HDby Scorpion7substance4,556 views
- 8:10
How To Build A Computer Part 9 - Connecting All Of The Cablesby thetechsheep21,557 views
- 6:46
P55A-UD7 4.4GHz 870 airby hicookie2,749 views
- 1:29
Kingston HyperX overclocked to 3068 MHz at GamesCom 2010by KingstonTechEMEA31,760 views
- 4:43
Unboxing - Gigabyte EX58-UD5by sheiraa13,037 views
- 2:24
Crysis HD 1080p Gameplay | GTX 285 - i7 @ 4ghzby 8lindfury2,614 views
- 0:59
Revo Drive x2 Boot up on a X58-UD5. Special Video for ADSLGATEby Otaibimn19841,308 views
- 2:54
Bios From Gigabyte X58A UD7by lbtfan901,619 views
- 0:49
ATI HD 5970 in Raven RV02 Case unmodded Gaming desktopby sdot7912,456 views
- 0:39
Gigabyte EX58-UD5 - Dynamic Energy Saver CPU LEDby Gudas013,472 views
I have my system running and this NB seems to get very hot to the touch... is this normal?
The Led stays in green BUT one time it was in RED flashing
and VERY hot to the touch
I have the exact same MOBO
i7 920
Corsair h50
stock fans from Cosmos RC-1000
I did change one exhaust fan tonight seems to be much better getting hot air out
HillaryHitler 2 years ago
@HillaryHitler the Led light should be
off= Perfect
Green= ok
Yellow= warning
Red =bad
bigjolly31641 1 year ago
I have this board and have not installed/built it yet
Is there some sort of fan for the North Bridge? Let me know please
Thanks
HillaryHitler 2 years ago
@HillaryHitler No NB fan its just a very nice heatplate
bigjolly31641 2 years ago
I have a question, when you overclock yours through the bios and then save the settings, does it shut off and come back on? Mine does and I am wondering if thats normal?
dave74x 2 years ago
@dave74x Yes it will reset that's Normal
bigjolly31641 2 years ago