Finally the ECU is working without drifting rich and misfiring - all ECU joints have been completely resoldered.
Results at www.taranakicarclub.org.nz
1985 AW11MR2 std 10.5:1 20 valve silver top 4age
with IHI RB52 turbo (6psi, 110rwkW between 6000 to 8000rpm)
At 8000rpm 1st = 65kph, 2nd = 105kph, 3rd = 152kph.
No LSD. VVT inactive. Standard 5 speed C52.
man I love your car. do you have any videos or the engine. i want to see how you did the turbo on that 20v. Sounds fuckin amazing.
RANCIDROBO 1 month ago
@FISHHEAD404040 230hp is good for a 4agte!
i am supprised that the c52 can take 400hp. i was told it would destroy its self at around 200hp.
the super 60 is the largest turbonetics turbo that is a T3 that they make.
perfect for under 2L engines, and effecent up to 22psi.
reatard132 3 months ago
@reatard132
We ran 177rwkW and about 300Nm torque for about a year.
Gearbox was fine. Could get close ratio TRD set for $5.5k.
Has same size gears as I have in my laser GTX making 450 bNm 400+bhp.
I saw a 400hp 4age turbo in NZ using C52 fine.
I don't know what Super 40 turbo is. If I did it again, i'd decompress it with GZE pistons & rods also, and aim for 300wkW - I know Evo 9 turbo does this.
FISHHEAD404040 3 months ago
@FISHHEAD404040 and how did the C52 stand up with that much power. i want to run on my aw11 about 15psi on GZE pistons and crank, 550cc injectors, Supra fuel pump, MS, Super 60 turbo, and screamer pipe, and some other stuff i havent remembered... lol
reatard132 4 months ago
@FISHHEAD404040 oh, is he on mr2oc? could i take a look at the car set up
reatard132 4 months ago
@reatard132 : Yep Avgas. Can only run 13psi. Dyno man tells me can we can run ethanol and more boost, but will make more power with same airflow. Need bigger fuel pump and injectors.
Car sold. in Hawkes Bay now.
FISHHEAD404040 4 months ago
wait, your running 10.5 to 1 comp, and turbo... you must be runing race gas.
reatard132 4 months ago
@FISHHEAD404040 Im considering fabing a box that bolts and seals up against the ITBs. Came across a calculator that suggest that with the 42mm ITB's in place, you have enough flow for up to 400hp+.
iolite1 7 months ago
@iolite1
standard 20 valve plenum would only hold 6 to 8psi
FISHHEAD404040 7 months ago
@esskay2200
Standard 4age 20valve silvertop. For sale on dub dub dub trademe co nz
FISHHEAD404040 7 months ago