Silverlit Palm-Z rudder

Use full screen mode! This video shows the operation of the Palm-Z rudder.
-the rudder is not proportional;
-trimming is proportional;
-the rudder doesn't work when throttle is low.

Category:

Entertainment

Tags:

• palmz
• palm-z
• rudder

[fredster12]

When you push up the throttle thing and let go it stays theree. this dosent happen on mine? do you think i have a fake? And there is also a problem on turning. i trimmed it but then it flies straight for a while and then starts turning to the right. And then circles down to the ground!!

[elubb]

Flying straight isn't going automatically: you need to keep both wings leveled.

I opened the transmitter and removed the throttle spring. That's why it stays there.

[Vaffeljern2]

Can you put it back?

[elubb]

Yes, you can put the throttle spring back if you want.

[elubb]

Not really, just circling is a bit boring. But if you have a big room, it might be more fun.

[SuperMillerman10]

mine wont charge

[SuperMillerman10]

mine wont charge or turn on ppppppppppppplllllllllleeeeeee­eaaaaaaaasssssssseeee hhhhheeeeellllpppp

[raichuzapz]

my rudder doesnt work can you help me plz il suscribe if you help

[Twistedsister543]

i know you posted this a year ago but if you still have it lol the only thing is tin foil will not work you need a soldering gun... so if you have on good for you or if you dont buy one there 10 dollars at radioshack and if it still doesnt work take it apart make something even better experiment with parts its alot of fun i make shitloads of robots of rc parts and old things i find

[VEELA123]

dude can you tell me how to work this?

i charged it but its not flying when i accelerate it ?

and like i dont hear anythin when i accelerate help!

how do u do the transmitter thing ?

[chazzers77]

you need to soldier it (although the wire is very thin and you will have trouble doing it

[startazz]

ok mate show us how it's done,no pun intened

[dillan94P]

guys, u kno the bottom wing, the white things holdin it up must hav come loose, and theres a small wire running through the left white piece, and through the lower wing. So as the white thing came loose, it must have snapped the wire, and ive tried reattatching it and using foil all for no good, and i think that wire was very important because now my plane does not turn...at all. Does any1 hav any tips on helping me save my palm z? Thanks.

[howitsdun]

Mine climbed too much even under 1/3rd power. I added small fins to the twin booms and this helped. Then, I cut the bit of foam holding the top of the motor assembly and shimmed it with a bit of balsa giving me a fair bit of downthrust. This helped a great deal. Now, the climb angle between low and full power is much closer.

Now it flys well. Much easier to control.

[RCReview]

Uhm, that's the point of trimming it.

So it WILL NOT turn on it's own.