Free Energy Demonstration - Delayed Lenz Effect

The only explanation that makes sense to me to account for the decrease in input amp draw from the original steady-state, is an Anti-Lenz type effect. Tell me what you think.

In the vid the coil is putting out 72 VDC x 0.06 A = 4.32 Watts...under normal circumstances, this should slow the wheel considerably and cause the amp draw of the drill to rise considerably as well. In this vid, the amp draw of the drill goes down approximately 0.2 A...so that's also an input wattage savings of 12vdc x 0.2A = 2.4 Watts...do you see where this leads?...lol. Prior to making the vid, I ran the AC (80vac) from the coil through an incandescent bulb (20W bulb-made it glow red) with the exact same result as in the vid. I also tried running the 72vdc 0.06A straight into another deep cycle 12v battery that I have and it instantly started to charge slowly with the same results as in the vid.

Also, just for clarification, the magnet poles are alternating and they attract through the core.

The channel that I mention in the vid is ThaneCHeins. The effect that he demonstrates is the same but my coil design is a bit different...it has an Ed Leedskalnin aspect to it. My coil needs refining/testing...it could be much better...and more need to be made. Thane describes the effect in his videos very well and shows how it can be explained with everyday physics. There are many factors but, it all comes down to Impedance and Frequency.

Some may question my apparent forthcomingness and this may lead to questions of the genuineness of this vid. Here's why I'm going to tell you how to do this...I hate money and secrets, but I love the truth! This idea has been out there for over 100 years and hidden, I'm not about to be stupid enough to think that I will be allowed to profit from it without paying a price. No thanks...lol...I'll just build my own generator that runs itself...so should you.

The How To vid will be coming very soon and I hope others replicate the same effect. Please share this vid so that more will see the next one.

Category:

Education

Tags:

• Delayed Lenz

[mkcbishop]

Let's be honest!! If I was using this exact model in my home to replace what feeds my energy source, I wouldn't want to live here.. BUT!! I like the idea of what you used, minus the drill!! ;)

[MrAnguswangus]

@mkcbishop Gee, how insightful. I used what I had. I get the feeling that you couldn't make a batch of cookies, let alone anything constructive.

I liked the fact that you watched my video, minus the stupid comment! Thanks for watching.

[wienguy]

Can you teach me how to make one?



[Khwartz]

@MrAnguswangus Hi! My problem is not about to replicate especially your device, but to make free energy credible, and to win time to any body while giving advise of standard procedures that could be credible to even professional; that's the point. And side to this, my other purpose is to evaluate which system could be brought to large public that is not skill in any way in electricity and handy work. You vids help me to male my judgement, but only if they achieve complete process.

[MrAnguswangus]

@Khwartz If I didn't appreciate your comment I would just tell you off and block you. I can see that you have conventional electrical training and I DO appreciate your comment.However, I should be able to kindly respond to tell you that you are wrong. Yes, I should have thought about what I was showing better.But at the same time you should be able to appreciate that YOU, being an electrician, are the best person to replicate this..why don't you?

Thanks for watching..more vids coming soon :)

[Khwartz]

@MrAnguswangus Dear, I've no problem with overunity! lol I've seen all about Thane work. But it doesn't change what I've typed, it's very know that without load values means nothing, & that was the case of your vid.

Now if you say you made different, so that's different, but not in your present vid, I'm sorry, I know what I say, electricity is my business & some here & there appreciate my comments to improve the quality of their experiments; it's ok with me if you don't appreciate

[MrAnguswangus]

@Khwartz You are wrong. The wheel speeds back up when the secondary coil is shorted...back emf cancelled. Therefore the energy used is free of charge. I did put loads on...also shorted out completely, wheel speeds up even more. You should watch ThaneCHeins videos, he is better at explaining the details. Or, better yet, you should try replicating this effect yourself if you're able to do so. Also, you misuse your lols. Thanks for watching Latka...now that's an lol!

[Khwartz]

@dataphreak

Sorry, if it's very good that MrAguswangus is interested in free energy, there is here nothing special about! lol All at the contrary. The speed slow down becaseu of Back-EFM and if he calculated 4.3W out, it's just little mistake because there is no load! lol the resistance of the Amp-meter is not enough. The correct process is to put load like a resistor for electronic and measure drop voltage in parallel of and current in series; & I can bent: it will drop the W value ;)

[Begbucks]

Subbed, good work!

[BoydMort]

I probably won't be the first person to say this, but it looks like a rudimentary single coil version of Searls SEG.

Prof Searl had the same reservations of producing his device as all parties that offered to produce it wanted to own the device patent outright and were basically, greedy.

[ddanvos68]

Remember when dealing with coils you dont use wattage as a measurement. Its VA ( Volta amps) , So you have to measure the voltage along with the amp draw. Anyway Im still confused what this video is about.

[wojsciech]

U all see someone is just making a point , a proof of concept, all of you do nothing- show your inventions/idea! u have non!! yeah you can only yeal!! live your life like slaves still , dont look for answear , just be- slaves thats all you made for....

cheers from poland

and good luck with you ideas Angus!! youre on the right track!!!