Hydrogen Generator Section D1-3 Assembly

Machanical Drafting / and Animation done by Gerry Hogsed - ghogsed@hotmail.com
Designed by Thomas Hopkins.
Shows how the HBY Generator is assambled. This system can be as small as 2 plates or as Large as you want. Designed to grow by just adding plates. For more info email me at hydrogen_by_u@mindspring.com

Category:

Autos & Vehicles

Tags:

• Hydrogen
• Generator
• for
• Cars
• and
• Trucks
• Electrolysis
• System
• HBY
• HBU
• D1-3

[alex681219]

did You test lye like electrolite? Let me understand..did you use 3 plates? how you conect the plates, (polarity)?

I´m experimenting with aluminum and produces 8 lites (2 gal) of H2O per gram in about 5 minutes .

The pound of emty soda cans cost $2.5 solars

[teh770]

This system had 5+ plates and 6- plates. I connect the voltage using Auto slip on Female Terminals from Ace hadward part # 33644. I am just using tape water.

I designed and sold videos of my Hydrogen Generator that generates hydrogen from aluminum. You can generate 1 liter hydrogen from 1 gram of aluminum and it worked at 250 psi so you could fill storage tanks straight from the generator. I fill a 60 gallon 200 psi tank using that generator.

[alex681219]

Nyce!!Your cell produces out hydrogen but i think that maibe you can use to produce electricity.

Some researchers have replace the nafion membrane wiht metal plates, just experiment puting in presured hydrogen .

What is the size of your cell? how much lyters/volts/amps of HHO procuces ?

[teh770]

Each Stainless steel plate is 12" x 12".

Running 2 -plates and 1 +plate with filtered water 12vdc uses 10.25 amps makes 1 gal hho in 32 minutes. Non pulsed 12 vdc input. Note: If you run tap water it only draws 7.3 amps per +plate per hour. Will be doing a pulsed 12vdc test some tome next week. Will post my findings.

This system was designed so it would be easy to enlarge just by adding a gasket and another SS plate.

[teh770]

Its hard to see but each SS Plate has a hole at the top and bottom. This allowes water to enter at the bottom and the hydrogen and oxygen to exit out the top. The last plate that goes on is clear this is the mounting plate of the circulation section.

This is only the Generator section of my system and only showes that you can add as many plates as you want. The secret is in the Circulation Chamber where the oxygen and hydrogen gathers to be used.