Heat It Up Pumpkin Red, And We Remove Broken Bolt
Loading...
Uploader Comments (CORVAIRWILD)
Top Comments
-
pumpkins are orange
2 years ago 8
-
if you were for some reason worried about the hardness of the metal, when its hot just drop it in a dish full of used motor oil. the carbon from the oil penetrates the steel, hardening it, just like a grade 5 bolt vs a grade 8
3 years ago 6
All Comments (37)
-
Cool truck
-
"The carbon from the oil penetrates the steel, hardening it, just like a grade 5 bolt vs a grade 8" What? Maybe the very surface, but how does it penetrate steel? It doesn't... the quenching might change the tempering though, depending on the temperature, heating time and speed of quenching
-
seriously, it's a fricken mirror bracket, it doesn't need to be hardened
-
sometimes burrying the hot object in hot sand and letting it cool gradually is needed as well, particularly when welding cast iron. it all depends on the application.
-
you should always let the material cool as slowly as possible and sometimes even post heat as rapid cooling of the metal makes it harder and more suceptable to cracking or breaking
-
W A T C H M Y V I D E O S!!
-
@PIchillin456 rust never sleeps... Lol...
-
@CORVAIRWILD well we got the suckers out but it involved drilling out the bolts and re threading the holes. We tried those techniques but even they couldn't get those things out. I don't think we will be replacing the clutch again on our own. What was supposed to take a day took 2 weeks. But thanks for this video. It was definitely helpful.
- 1:32
Where's The Lug Nut Key? Uh Oh....by CORVAIRWILD12,766 views
- 2:39
Busted Mirror Bolt? No Problemo... Got Torch! And Stick...by CORVAIRWILD1,685 views
- 1:10
Crankin' a 180 TURBO in California!by CORVAIRWILD24,230 views
- 0:43
Belt Sanding The High Spots...by CORVAIRWILD483 views
- 1:52
Bolt-Out set: does it really work?by mishmosh200058,804 views
- 1:41
Extracting a broken stud from an engine caseby jcorsaro92,945 views
- 84 videosRUST REMOVAL , NUT REMOVAL , AIR COMPRESSOR
- 5:44
Bolt Removal the "Right Way" by O'Reilly Fabby OReillyFab15,473 views
- 1:23
DIY - Rusted Nuts and Bolts Come Loose Easilyby FabKing1109,320 views
- 5:34
Screw extractor | easyout | broken bolt removalby ultimatehandyman23,144 views
- 0:58
flameless nut and bolt heatingby adammorrison7557,198 views
- 1:50
freeze off, frees seized connections easilyby firthellen6,518 views
- 2:49
How to remove a studby ultimatehandyman57,857 views
- 0:49
How to Remove the Crank Shaft Pulley Bolt on a Honda Accordby chefigo135,458 views
- 2:40
Micro-Grabit Micro-Drill Out Broken Bolt Removerby AldenCorp16,181 views
- 0:08
Flameless damage free Frozen or Rusted nut removalby wwwTHEINDUCTORcom71,625 views
- 2:12
How to use a screw extractorby hardwarehelper80,831 views
- 1:59
How To Unstick Rusted Nuts and Boltsby Howcast20,753 views
- 1:28
Da trick to loosen main crank pulley boltby washmetv77,234 views
- 9:02
Removing stuck boltby lincolnmaniac12,953 views
dosint getting that metal that hot and then putting water on it make it weaker ?
bjswagger99 1 year ago
@bjswagger99 Yup, but it's not an issue
CORVAIRWILD 1 year ago