Uploader Comments (jacquesone100)
All Comments (27)
-
Great video!
What type of Rx and Tx are you using?
Did you balance your propellers?
-
@jacquesone100 Might want to try out the KKMulticopter boards. They're half the price, and pretty simple, and you can program it yourself too.
-
@jacquesone100 Thanx man, I ordered a 4000mah 3cell turnigy nanotech and will test this with 8" , 9" and 10" props. Lets see the flying time improvements compared to the 2200mah 3cell. My FY90Q board is in transit so I'll have to test this one as well. (Sjaak's hobbyshop in Leiden ??)
-
@burghoorn best is arround 3500 weight/fyingtime ratio it can handle 5000mah on 8 inch props,,,but no rough flying then..so with a 2200 mah it handles real good but no longer then 2/3 min on 5000 mah u can fly upto 12 min if u take it eazy and with a 3500 arround 6/7 min.... also if u fly with 10 inch u might wanna go for the 3500 till 5000 range...all 3S since the amp draw will be higher...but u have more control with 10 inch
10inch x 4 = 40Inch!!! hehe
good luck
-
How much capacity (mAh) ?? I think 2200mah is not enough to get acceptable flying time .. should I order 3500 / 4000 / 4500 / 5000 mah even if these are heavier ? Let me have your advise pls.
-
@burghoorn im using 3s and i havnt got any problems with the sk series uptill now..
good luck dude!
-
Thanx I know where to go to .. what lipo are you using with your V4 and V5 quadcopters (any tips?)
-
@burghoorn i got m at the local hobby shop..in leiden..
good luck
- Loading comment...
I like you builded quad but, I manor air how you linked all the esc , circuit board and what ever else together . I t will help if you show In a video.
coolwaterhubby 2 months ago
@coolwaterhubby ok i will make a vid that will show exactly how to hook it up!
jacquesone100 2 months ago