3 axis CO2 Laser CNC Machine

3 axis 130W CO2 Laser cut cnc machine for wood working.
There are three Laser Control Selection on the panel:
- Floating Head (the head will go up and down to touch the material and keep the same focus high for cutting)
- Fix Z high (Z will not move, it will keep the fix high for cutting/engraving)
- Read the G- code Z depth for control the different laser power (1%~100%).
website: www.easycut.com
e-mail: sales@easycut.com

Category:

Science & Technology

Tags:

• 130W CO2 Laser Cut CNC Machine
• EasyCut EasyCut motion control
• DC servo motor driver/control
• MDF cutting
• Wood engraving
• photo engraving
• Acrylic Cutting

[clyse88]

does the machine cut depths, or only through a metal.

[manycnc]

It can cut wood, acrylic, paper...

and engrave into stainless steel.

It can't cut metal.

[XOH4YB]

@Tommiclio No it wont. we used to cut paper on 2 foot laser machines in school. works great and no burns

[Tommiclio]

@CHRISTMASBASTARD ohh thanks for answer :)

[CHRISTMASBASTARD]

@Tommiclio theres not enough oxygen for it to flair up or something like that

[Tommiclio]

@manycnc Im sorry....PAPER!??

Surley it would just burn!?

[0title0]

Osz kurde..

Ale to mi się podoba.. 8D

[FISHURMOMBALL]

really depends on the power output right?

[martincrest]

i cut 25 mm ply on lasers that are 26 years old !!!!!!

[pr5021]

Manufacturers of laser machine will tell you that the laser power is changed to one that lasts you 10 years or more but that is not correct them, the more you use a laser machine to cut or just hanging on the inch of material you may last 4 to 5 years in daily use to make a machine but actually give it to good use at the end because if you leave the machine 30,000 1 or 2 years you can sell more than 150,000 dollars to use a machine because of that can produce all