During this test tonight 9-1-2011 was our first test running on the ultrasonic Gasoline vapor carburetor with compressed air with the video camera rolling to capture every moment of the first run. This was a rough test working out many different ideas that was going through our heads. During the test we found out what side of the chambers need to be pressurize. The only side that need to be pressurize is the ultrasonic vapor carburetor side that which would pressurize the gasoline delivery system side. During our test we found out pressurizing the carburetor side forces the liquid over to the ultrasonic side where it is leaving the chamber through the top causing a continuous draft forcing the liquid from the carburetor side to the ultrasonic side. during our test the air pressure regulator valve brand-new out-of-the-box went bad. We are open-sourcing to get suggestions from you because this is the open-source form way for everybody to share ideas so that we are all consumers of the ultimate device that works for today.
would you need a flash back protection?
cheapliving123 1 week ago
ELENIN CAN BE SEEN NOW!!! LOOK AT THE SUN WITH 2 CD-s (not with one, because the sun-s light its to bright to identefy the black object) and a black spot can be seen in the left part of the sun!!!! on some cd-s there is a clear part of the foil that lets light pass through clear!!! copy paste that every one sees it!!!
stefaannnn 5 months ago
I think you need another toilet plunger...
CoraxMaximus 5 months ago
Make a small enclosure w/two heater cores in it. on 1 end a fuel injector. spray against heater core with hot water flowing thru. other end draw air out of chamber to intake of motor. make small venturi to allow air into chamber. meter fuel/vapor deliver by controlling fi w/microcontroller.
sisqocracker 5 months ago
12:39 Your assistant is very attentive. I'd hire Mike in a heartbeat ;)
Begbucks 5 months ago