214 km/h SAPAC T-45 Goshawk EDF JET from Hobbyking

Speed runs to see just how fast the T 45 would go! 214km/h was the top speed for the day.

Specs: Flying weight 1.3kg, 64mm RC Lander EDF, Turnigy Plush-60A ESC, Turnigy 4 Cell 14.8V 40-50C 3000mAh Battery, HXT 900 9GR servo x 6, Eagle Tree Airspeed Micro Sensor V3 (standalone).

Category:

Entertainment

Tags:

• edf
• jet
• 200
• km/h
• plus
• EDF
• rc
• plane
• aircraft
• hobbyking
• 45
• goshawk
• sapac
• fast
• model
• 64mm
• lander
• low
• level
• flying
• airplane
• planes
• aviation
• pilot
• fighter
• jets
• high
• speed

[gregpirolo]

Your jet sounds sooooo cool!  Can you please tell me which model RC Lander 64mm EDF unit you have? I found 3 different 64 mm models from RC lander. Thanks

[RCSkunkWorksADP]

@gregpirolo Thanks! and the EDF unit I'm running 4300 KV model....

[3down55]

nice!

[nighthawk0077]

Could you post how many watts and amps you're making?

[solentlifeuk]

@Ericmodelanotche

Much easier with RCSpeedo .......... no need for all that left / right click stuff .... - RCSpeedo gives speeds at all measureable points of a flight ... direct without you needing to work !

[solentlifeuk]

Sorry to ask ... but my doppler speed checker gives MAX speed at any point in the flights of 183 kph ... the 206 kph flight gives 176 kph ....... I think the ET logger is giving momentary speed max - not a sustained level pass which is more acceptable for official logging.

I'm not being an ass ... just would like to get to real figures. I'm fitting a Turnigy Rx switch to activate my logger for official runs ...

[solentlifeuk]

Interested in the Eagle Tree logger ... as I am trying to find way to switch on / off in flight to get true level pass speed .. because I bet your high speed result is when model is diving into the pass ... not straight level ?

[7jsm7]

Whoa. . . . . . . . . . =)

[mrgarvarno]

Guys, awsome video. I take it thats the police padocks site? I was so impressed i ordered the lander fan from fanjets USA, ( only place i could find one at 4300kv model ) and the t-45 from hobbyking. I notice you have what looks like wire suspenders to keep the wing tips up on take off-landing and also a lower dorsal fin at the front lower end to keep the nose up, is that correct? awsome aircraft and how cheap!!

[PlancksTime]

@RCSkunkWorksADP You mean, RC Lander 64mm 4300kv 4S Lipo Metal Fan? About $100 from rc electric jets dot com? Also, you flying in Aus?

[2004ayden]

Is this the hobby king 64mm T45

[MrMrwilem]

nice spot landings,,,the way it should be.