brandt kdn 530 c edgebander with corner rounding

0.4 - 8 mm (5/16") Edge cap., panel thickness 15/32" - 2-5/32", min. panel length 160 mm (6-3/8") and 65 mm (2-1/2") min. width; line control (NO limit switches) for workstation function. Automatic height adjustment with top pressure beam for all work station, equipped with digital height indicator.

• PC-16 Program Control; with 7-1/2" VGA screen 8 MB IDE flash disk, 8 MB RAM, Internal Modem for remote diagnostic link; Signal infeed light to insure proper spacing between panels.

• Equipped with: Quick heat-up glue system,(approx. 12 minutes) w/glue tank for maintenance & glue color change. Glue tewmperature indicator for both the glue pot and glue roller with LED thermostat and automatic temperature reduction if the machine is idle for 15 minutes ot more.

• The glue applicator roller is also reversable and retractable from the fence line.

• Automatic magazine for strip & coil (Large coil table 800 mm diameter to accommodate large coils of 3 mm PVC) stock, 3 mm PVC guillotine, (1) drive plus (1) split secondary roller "pneumatically controlled" pressure sections.

• Workstations: End trim (1/3 HP - 12,000 RPM motors), chamfers 0° - 15°via programmable controller.

• Top & bottom flush/radius trim, bevels 0° - 15° (1/2 HP - 12,000 RPM motor), with straight insert cutterheads for 3 mm PVC. Can also be equiped with radius cutterheads.

• Top & bottom scraping for 3 mm radius, pneumatically controlled indexing system; top & bottom buffing (0.25 HP - 2,800 motors).

• End trim & flush trim stations have HF motors w/electronic brakes; feed chain track speed 36 FPM, 2 HP feed drive.

• 1-Motor corner rounding unit for top & bottom corners (0.5 HP - 12,000 RPM motor); top & bottom scraping for 2 - 6 mm radius, pneumatically controlled blowoff nozzles; top & bottom buffing (0.25 HP - 1,400 RPM motors).

• Complete with: Operator control panel w/PLC (Programmable Logic Control) keypad & LED readouts, and used tooling.

Category:

Science & Technology

Tags:

• edgebander
• brandt
• corner-rounding
• 3mmpvc
• woodworking