go kart- part 4
Loading...
Uploader Comments (slalomflex28)
All Comments (31)
-
that locks not like a real kart
why have you done the frame not like an original kart ?
but its not bad
-
I want to make a go kart aand electric too and I am unsure about some things. You look like you know what your doing, professional. Can you help me? I just have a few questions. Thanks.
-
What kind off brakes are you using?
And how are you mounting them? I'm building an electric go-kart and I'm having trouble finding the right brake and mounting system.
Thanks
-
.....artwork
-
why u have the the air inlet on the inside of the cart like that it going make puting air in the tires a lot hard
-
Do you have single piston floating caliper brakes on there?
-
where did you get the spindles and tie rods from and are they expensive???
-
it depends on wat u want if u want a cheapy it wont cost mutch but it will wear out really fast or u can buy a heavy duty one that will work better and wont wear out for a long time but will cost more
-
can u use any type of clutch on a engine
-
i'll buy it for 100
5:38
Hossfeld bender #2 with hydraulic home-made conversionby NPC9455028,102 views- 1:52
go kart part 5by slalomflex2840,940 views
- 5:33
Red Monster Bauphaseby Oberbricoleur105,789 views
- 3:12
How To Make A Go Kart With Lawnmower Engine : Part 4by RYANO22119,950 views
- 3:00
homemade gokart part1by matthew123456789ism20,535 views
- 0:44
Jack Shaft New Partsby mcl768100,720 views
- 3:21
New Jackshaft assembly and smaller sprocketby Swamigonebananas94,288 views
- 0:45
go kart part 1by mechanicojoe29,309 views
- 1:20
electric go kart- part 3.by slalomflex2841,266 views
- 0:26
a look at the home made brake system on my go kartby Edgarbopp25,451 views
- 1:52
electric go kart- part 1by slalomflex2821,821 views
- 1:51
Wagon 2by kranski9329,090 views
- 0:57
V-8 Go-Kart . . . "Bad Idea"by HutchSkierka8,277,200 views
- 1:54
Go-kart front suspension designby GRAHAMAUS42,545 views
- 0:45
suzuki pv600ccby wigi69605,979 views
- 4:49
GO-KART from Krosno part.1by sowinho169,914 views
- 3:04
Close look on the electric gokart that beat 2 strokesby kartelec468,513 views
- 1:42
Rear wheel to axle mounting detailby wires9941,998 views
- 0:37
my go-kart just before i test drove itby xxfoxracingxx3187,303 views
- 6:12
Go kart Areneroby aav050990166,402 views
No problem mate, Anytime.
slalomflex28 3 years ago
Are those bearings I see that are securing your steering shaft to the frame?? If not, what components did you use and did you get them from?
Thanks
Swartz8806 3 years ago
They are called pillow blocks, A bearing in a housing basically. I got them from RS(radio spares. The steering ones are 16mm ID and the axle ones are 25mm ID. You can get them on ebay as well. Should be under a tenner for the axle ones, Under a fiver for the steering ones.
You could get proper kart ones if you wanted from somewhere like spellfame karting.
John.
slalomflex28 3 years ago
where did u get ur supplies from?
sayhi2M3F00 3 years ago
Zoom karts, Spellfame, Ebay.
slalomflex28 3 years ago
friend as it is called those arms that it has in the direction? I need them
09power09 3 years ago
????????????
slalomflex28 3 years ago