GEET Water Fuel Plasma Reactor Chamber Explained Part 1

Paul Pantone's GEET Device Explained in Full Detail. For everyone that doesn't understand that this is a fine tuned device. Just because some people failed building it, doesn't mean there hasn't been successful attempts at making this device work.

Building Plans: http://download.hyperfileshare.com/download.php?code=4456784d&sid=8c40058...

(This file has been downloaded and it contains much of the information necessary in order to build this device. Also gain a BETTER understanding over-all.)

There is a exact science behind this device! The people who failed, failed because of their own wrong doing.

Devices Fitted Successfully:
http://64.233.179.104/translate_c?hl=en&langpair=fr%7Cen&u=http://qua...

http://translate.google.com/translate?u=http%3A%2F%2Fperso.orange.fr%2Fquanth...

http://translate.google.com/translate?u=http%3A%2F%2Fperso.orange.fr%2Fquanth...

Description of Device Operation:

Plasma Fuel Reforming with PMC (Processing Multi-Carbons)

The bubbler is a tank containing a mixture of water and hydrocarbons (gasoline, diesel, kerosene, crude oils and others derived from hydrocarbons...).

The hot gas flow coming from the exhaust of the engine circulates by the outside part of the reactor with a strong kinetic energy, that contributes to bring up to very high temperature the steel rod (being used as heat accumulator) contained in the pyrolytic chamber. The gases cross the engine and penetrate then in the bubbler containing the water/hydrocarbon mixture. The vapor of the mixture is strongly aspired by the vacuum created by the engine intake and is pushed by the pressure coming from the exhaust. The kinetic energy of the vapor is increased considerably by the reduction of the diameter in the pyrolytic chamber (by Venturi effect). The combined effect of the high temperature and the increase of the kinetic energy produces a thermo chemical decomposition ( molecular breakdown ) of the water/hydrocarbon mixture.

The endothermic reactor forms an Electro-Plasma-Chemical unit (EPC) and it is now possible to create a high-output fuel coming from the decomposition of the water contained in the water/hydrocarbon mixture. This fact is confirmed by the presence of oxygen gas (O2) in great amount measured in the exhaust.

More information:

At the Massachusetts Institute of Technology (MIT), researchers are developing a reformer, which, like the KCB&H one, uses plasma for reforming hydrocarbons. The advantage of a plasma reformer is that it can use all forms of hydrocarbons, including heavy oil fractions. In addition, the plasma reforming can operate in pyrolytic mode (thermal degrading of organic material without air or oxygen) so that the carbon is turned into soot. This eliminates the formation of CO2. Plasma technology allows for a more compact and lighter design than traditional reformers because the reaction occurs much faster. (BingoFuel Reactor)

Category:

Howto & Style

Tags:

• Pantone
• Water
• Fuel
• Fuelless
• HHO
• Hydrogen
• Overunity
• Plasma
• Ignition
• BingoFuel
• Survival

[r380]

Why I can't download diagram? There is another site to download diagram?

[sirHOAX]

Updated the link to more information regarding making your own Vortex Heat Exchanger. Otherwise known as the "GEET" Device. Please check the 'more info' column on the right for the link to the *.zip file which includes plently of information regarding this device. Which also includes information on actually building, contruction, materials, etc.

Thanks for your interest, this device does in-fact work if set-up properly. People have seen increase from 75% to 200% on fuel consumption. FACT!

[sirHOAX]

This is also known as Fuel Reformer Technology, or Steam Cracker / Steam Reformer.

Regards, and always keep an open-mind to these technologies or otherwise they are useless if no one is using it. It is up to the individual to make a difference. Do not rely on others to do it for you. That is where people make their mistakes in life.

--S--

[petimoritz]

Do you getting that what his talking about when he mentions "pi r square"?(or something like that)

Also I would like to learn more about how to size the pipes and the rods for cars!

He mentions:1/32 inch the difference in rod diameter between the rod for the gen. and Volkswagens, but nothing ales!

Awesome stuff though!

Where did you get that from?

[sirHOAX]

Have you looked at those links on the right under 'more info' if not be sure to have a look. You will get a good understanding from what they go over with the installations. The spacing around the rod from the intake pipe is only 1/8 of an inch.

They make their systems so they can change the rod lengths. You have to have it so you can remove the reactor rod to inspect it from time to time.

[sirHOAX]

When he mentions the "pi r squared"

All he is basically saying is take your old outer diameter exhaust pipe, then you have to take the new install of the inner reactor pipe into consideration. So you have to upgrade the size of the exhaust where you have the reactor rod inside the exhaust.

Old tail pipe: 2-1/2"

New tail pipe: 3" - because of the inner 1/2" reactor pipe installed. Hope this helps.

[Spitfireseven]

I've seen a few really brilliant teachers. This is one of them. He not only understands the theory. He has done it and gets to the point making things understood. After he explains something, you can do it.

[bryishere]

Everyone should really try this. IT WORKS. Have spent a lot of time on this device. It's very simple. Just follow the plans and experiment as much as you can. Currently on a 1 ton 1969 Chevy truck using 90% water - 10% crude oil/waste oil.......Get out in your shop!!!!!

[searcherofdatruth]

problem here is that as soon as someone comes out with a device that cannot be billed/profited from (by the powers that be) they either get put out of business/ them and their family is threatened/ they are discredited in the media/ killed... or anything else that will keep the product out of the market.

spend some time researching it especially see panacea's energy supression dvd on youtube that will give you a good idea of what has been going on and why we don't see any of these inventions

[conor34040]

Paul you are a true hero and the truth will soon prevail.

[narivasant]

I built this and it works. A fellow experimenter Leo Umila put one on a turbo diesel and he is getting 4X the mileage. My friend Mike in the USA put a sight glass on the end on his GEET and he can see a blue plasma glow around the rod while it is running.

see more about it here:

flickr. com/photos/37257699@N03/

and here:

tech.groups.yahoo. com/group/VortexHeatExchanger/

remove the extra spaces

[ncbookz]

yahoo news video just did a video on this saying it works go to videos science

we know we can live for free they are all lying we are not in a closed system we are taking energy into our system  daily from the sun 2nd law of thermodynamics is for a closed system the earth is not a closed system

[ActiveStorage]

i heard this guy is in the mental hospital.. what the fuck is wrong with us government?! why is he there?! i cant find any info on the internet. plz respond

[sixmagpies]

So where may one see, or purchase, a parametric system diagram. Without that, this yelling and showing bits of weird pipework is a bit pointless and certainly not going to help the inventor.

[MINIBNRR]

The bubbles mix it the gas takes water with it into the carb into the geet then into the engine as hho and whatnot. it mixes as it goes.

[MINIBNRR]

the rod for water is 3inch long oil is around 9 gas is 6, alcohol is 4.5inches abouts, you have to tune the rod to find the lenth, the rod will be marked where you do not cut but get another rod and then cut that one after you deguassed it, you may use the old rod only if you remove the magnetic signature left and marks or cut it then reinstall. It can be a little tricky with magnetic signatures on the pipes from plasma cutters at the factory.

[DaZeDmerlin]

So, this means there is NO NEED for OIL at all!!?

So, every human could be independant from any oil company.

How obvios do people want it to be, This invention is OLD, but it was allways hidden from the people, because it would mean that people would be independant, and war (depopulation) would be drastically decrease.WAKE the fuck UP!

[Ride4FunRob]

It's Bob from NY. Your impressive Mike. You perfected it in the PICC didn't you.