Are they the stock heads, (not the cams, not the valves)? Where did you get those sleeves? How many hours into the project are you? I'm pretty interested in this seeing as how this was pretty much what i had in mind for my next project :). Also when do you think you will have the car completed and road ready?
@thefonz686 The heads are not stock. they are custom ported by Xcceleration, with a big valve job and custom .445 SOHCs. The sleeves are custom made for Xcceleration. Have about 2yrs work into the R&D and building over the last 4+ years. Almost done. Need to upgrade the pulleys, one more time, to 8 groove, so I can run the AC and still have 25psi. She's running now with toothed pulleys. Then I can finish the rest of the car and be on the street. Done maybe next spring.
It's going into a 2000 RS coupe. The car is completely being upgraded to handle the power. You can see the buildup at the above link. There are many pages.
hi, we have not completed the new 8 groove pulley we need to drive the SC and the AC. when it's completed we will be able to put the engine in the car and complete the other mods.
@GarrettGiuffre Hi, the heads and cams are our own design. The heads have a big valve job for increase air volume, custom runners and porting to increase air velocity (unique to use) and custom .445 lift cams to get the air in and out. The supercharger is running 25psi now, up from 20psi. So, to make the power we are, we are using our custom heads and cams, along with everything else we have engineered ourselves. This engine just wants to GOOOOOO!
Are they the stock heads, (not the cams, not the valves)? Where did you get those sleeves? How many hours into the project are you? I'm pretty interested in this seeing as how this was pretty much what i had in mind for my next project :). Also when do you think you will have the car completed and road ready?
thefonz686 6 months ago
@thefonz686 The heads are not stock. they are custom ported by Xcceleration, with a big valve job and custom .445 SOHCs. The sleeves are custom made for Xcceleration. Have about 2yrs work into the R&D and building over the last 4+ years. Almost done. Need to upgrade the pulleys, one more time, to 8 groove, so I can run the AC and still have 25psi. She's running now with toothed pulleys. Then I can finish the rest of the car and be on the street. Done maybe next spring.
white25sc 6 months ago
@wtfyourafuckindoosh go to xcceleration/imp-gallery-rs.sc.htm
It's going into a 2000 RS coupe. The car is completely being upgraded to handle the power. You can see the buildup at the above link. There are many pages.
white25sc 7 months ago
why don't you have any in car videos?
superbman84 7 months ago
@superbman84
hi, we have not completed the new 8 groove pulley we need to drive the SC and the AC. when it's completed we will be able to put the engine in the car and complete the other mods.
white25sc 7 months ago
How much work did you put in those heads, I have some SOHC heads that i was looking to PP to get better flow
GarrettGiuffre 8 months ago
@GarrettGiuffre Hi, the heads and cams are our own design. The heads have a big valve job for increase air volume, custom runners and porting to increase air velocity (unique to use) and custom .445 lift cams to get the air in and out. The supercharger is running 25psi now, up from 20psi. So, to make the power we are, we are using our custom heads and cams, along with everything else we have engineered ourselves. This engine just wants to GOOOOOO!
white25sc 8 months ago