How to Build a Wine Rack

Home improvement expert Ron Hazelton shows how to build a wine rack, a perfect woodworking project for wine connoisseurs. For more woodworking projects and tips, visit http://www.ronhazelton.com.

Category:

Howto & Style

Tags:

• Home
• improvement
• Ron
• Hazelton
• HouseCalls
• how
• to
• build
• wine
• rack
• woodworking

[ronhazelton]

Thank you so much for the feedback.

[BeachMan2007]

how do you figure out the spacing between the circular cuts that the bottles rest in, so that the neck holes and the holes for the body of the wine are align?

[ronhazelton]

@BeachMan2007 Bore the base cut outs first, then lay an identical board alongside and, using a square, draw lines from the centers of the base cut outs across the adjacent board. That should give you the center of the cut out for the neck of the bottle.

[ronhazelton]

The dado should be about 3/4" deep.

[twowheeltonyracing]

I spring-boarded off this plan to build this rack. About $24.00 and a few hours work. par urethane to finish it up. Here is a link to the finished rack.

[titoruz]

Exelente !!! Lo hare .. Gracias por el video !!!

[saucychurch23]

absolutely love it. great work!

[MoodMuzik9]

what measurements do you recommend in making the holes im confused please say in milimetres

[GypsyPacket]

Just completed a double size of this rack and love it. We however, encountered two problems. Some bottles are too wide and can only fit through the rear of the rack. Increasing the side size from 6' to 6.5' ought to cure this. Other bottles are now slightly shorter in the body and tend to slip out between the holder falling on the bottle below. Shortening the sides to 11.5' should fix this.

[mmzznnxx1]

@ronhazelton Thank you.

I'm going to try to build it this week.