Bicycle Parts - springer fork, steering tube, and headset installation.

Installing a bicycle springer fork, steering tube, and headset. In this video we are using a 26" bent springer fork with a 22.2mm headset. Here are the part numbers used:

513005 26" chrome bent springer fork. steering tube 7 1/2"" long from the top to the bottom bearing race, 4" of threading at the top.

503008 chrome 22.2mm headset with bearings

The same process is used for installing any size springer fork onto a bicycle frame head tube.

Category:

Howto & Style

Tags:

• bicycle
• frame
• springer
• fork
• steering
• tube
• head
• set

[JOSIAHMUSIK]

Is more grease on the bearings better? Im buildin my firsr bike and puttin my forks on in the next couple of days. Any help would be really appreciated thanks in advance

[cleric022684]

cros threaded it with the first nut....noob

[grafftodatrack]

you guys are hella expensive other people sell them 20 to 30 bucks cheaper

[locutus340]

how would you install a mtb front shock seup on a wallmart beach cruiser the cruiser has one of those goose neck cheap styles where it fits inside the tube and tightens against the wall of the tube.. im trying to figure out if i can install them or not?

[Bobio93]

@djvortek1 Yes.

[AustinSpace20]

he should have cut the steerer tube down to size to that lock ring can hold the spring down properly.

[ezescousin14213]

3:28 that looks like fuck'n garbage

[djvortek1]

can you put a fander on the fork spring???

[mccunecp]

cool you have the same bike brame now question were do you get the bearing races for the top and bottom the flared our parts I have a tripple tree fork that i'm installing and I have not bearing races or bearings and its not a threaded tube like that one do you have any ideas thank.s

[5150santana]

not the right way do not do it this way!you will fuck up your shaft thread