LongRopeADSL
Loading...
Loading...
232
views
Loading...
Uploader Comments (Brianne163)
see all
All Comments (8)
-
THANK YOU! I have been having so many problems with my rope and now I see it is my set up!
-
Do you have a three or four hook rope machine?
Let's say it is a three hook one.
Start with a larger block of wood.
Then do the layout to drill three holes at an angle through the length of it.
Now, Chop, split, cut or whatever to remove the outer wood until you are at the center of those holes.
Smooth it all up and there you are.
-
Did you make the traveler? I was trying to find plans on how to make one. Thanks.
-
Good job! how much lubrication & type is generally used on the gear teeth and rubbing surfaces inside the machine?
regards,
Loading...
5:38
Traditional Rope Makingby SandyLakeMuseum1,114 views- 2:41
Rope makingby zoerimmer1,743 views
- 1:58
Making a Caution Rope 3by RopemakerDann1,499 views
- 2:50
Making Ropeby archanth34,609 views
- 1:09
WWIISirenRSL.wmvby Brianne163237 views
- 0:24
Hold-it aerosol spray can straw holder video #2by scalabration203 views
- 0:17
Rope making machineby mkupnorth58,826 views
- 4:49
How to make a paracord fast ropeby goingprepared54,338 views
- 3:15
Rope Making.wmvby Quaysider47795 views
- 1:26
Scale rope making using a ropewalkby abongdotcom6,026 views
- 13:45
mitteleuro_20D4D7435EAA4DCC9E8E38DE4CF67248.wmvby Brianne163189 views
- 2:47
Treepuller2by Brianne163114 views
- 1:05
Singer Hemstitcher Attachment.MOVby wwwApril1930scom1,192 views
- 0:28
Jump Rope making!by PortDiscovery637 views
- 3:15
Sarvoday Plastomech - Bunch Closer Type Rope Making Machineby georgejc4u1,255 views
- 5:26
The Histerical Sisters Rope Making Video!by thehistericalsisters137 views
- 6:59
how to make a ropeby bdaltonb516,386 views
- 9:59
Pieter demonstrates rope-making 11/07/08 WildEarthby WEcamfan445 views
- 3:54
How to use the Singer Hemstitcher Attachment.MOVby wwwApril1930scom3,797 views
- 5:35
Rope making. Hand made rope from bailing twine on home built machine.by linen2rope4,122 views
Glad to be of assistance.
Brianne163 1 year ago
Turned the cone shape on a woodlathe first.
Then mounted it in a jig and routed the three grooves.
Brianne163 1 year ago
There are no close tolerance bearings in this machine so a little engine oil once per month is sufficient. This machine is over 100 years old.
Brianne163 1 year ago
There are no close tolerance bearings in this machine so a little engine oil once per month is sufficient.
Brianne163 1 year ago