Installing an "inside corner paper tape patch"

Tips on installing a drywall inside corner "paper tape" patch are shown & discussed. Follow the required "steps" for installing a drywall inside corner paper tape patch. Make sure you put enough "mud" on to prevent any of "these". If you don't do "this", you won't get a nice tight corner when installing a drywall inside corner paper tape patch. Watch & learn. Want some painting tips for your next painting project? Visit: www.videojoeknows.com

Category:

Howto & Style

Tags:

• drywall corners
• drywall paper tape
• sheetrock corner tape
• videojoeknows
• instructional video content
• easy how to diy
• watch & learn

[zeedottv]

@VideoJoeKnows THANKS  WILL DO!!!!

[VideoJoeKnows]

@zeedottv Great! Joe :0

[zeedottv]

real helpful thank you!!!!!

[VideoJoeKnows]

@zeedottv Glad to see you want to learn how to do it yourself! I have lots of drywall videos that could help you with your projects....& beyond!. Take a look around. Anytime you have a howto/DIY question, let me know. I'm here to help you with your projects. Joe :0

[spelunkerd]

I'm guessing you used dryer mud because you want it to dry faster. Would you have used a more watery mud, drawing the paper through it before application, if you had more time to do it? I notice you don't use a corner trowel -- it seems like many professionals don't bother because it doesn't save them much time. Thanks for posting this effort - it's the small, time saving tips that are most useful.

[VideoJoeKnows]

@spelunkerd If you are doing alot of corners & not just a patch, you might want to use all purpose joint compound but remember to let the mud dry all the way before applying the next coat, as the mud will shrink on each coat, if you are not using a quickset compound. I have other videos that talk more about quickset tape & the benefits, etc.. Look for them. Joe :0

[VideoJoeKnows]

@spelunkerd Most pros don't use a corner trowel as you then are switching from this trowel to a regular 6 inch broadknife when the mud exgtends beyond the end of a corner trowel.....plus some corners end up not being true 90 degree corners then your corner tape doesn't fit in there nice & tight. The tape needs to follow the contour of your inside edge. When you do alot of corners, you just get better with using the broadknives, you'll see. Thanks for commenting. Joe :0

[VideoJoeKnows]

@spelunkerd I used quickset mud since this was a patch & I wanted to apply the other coats of mud the same day, so I could finish the patch in one day. If you use regular all purpose joint compound, you would have to wait for it to dry between coats as the mud shrinks when drying......quickset doesn't shrink. Joe :0

[VideoJoeKnows]

@HelloCuteKitty81 Let me know how your patch turns out. Joe :0

[VideoJoeKnows]

@DiamondSoul04 You're welcome...& welcome aboard! I have lots of sheetrock/drywall videos so check them out. They may help you with your projects. Have any questions after that?...let me know. I want to help you with your DIY projects. Joe :0