Line 6 M13 and PedalSnake hook up demo

How to use a Pedal Snake cable to power your Line 6 M13. Using a basic Pedalsnake you will need the following 3 adapters for the hookup: The MF1-H Hi Current PLine (there are 2 cables that come in this package - one for either end of the snake)- the 2521-A Pline adapter and the 2125-AR Pline adapter.

Category:

Music

Tags:

• Pedalsnake
• pedal snake
• line 6 M13
• M 13

[barrdogg2000]

but why??? whats the point of a pedal snake?

[spakuloid]

@barrdogg2000 IF you are running effects in front of the amp and in the effects loop of the amp (called 4CM - or 4 cable method) -- AND - you want to have your power sources all at the back line instead of having wall warts and stuff on your pedalboard - the pedal snake is basically 4 - 6 cables all in one - depending on what you need.

[onxwingsxofxlead]

If you have a good clen pedalboard setup, the Pedalsnake relly does clean everything up even more. My setup tme has dropped from 10 min to about 30 seconds

[Hankandthetanktops]

huh~?

[briansmoke]

This is actually a really clean way of hooking up guitars, amps and pedals. I have a 6 way custom pedalsnake with 6 standard lines. It powers all of my pedals carrying 9vDC/12VDC and 12vAC through three lines, with guitar signal in another. Amp switch in another, and effects loop send/return in the other. The connectors are hidden within my pedal board, so there is only the big single cable going from the pedal board to the amp where all the power and loop stuff is hooked up.

[HackerGuitarist]

I was hoping this product would make a much cleaner setup ,,looks like there are alot of cables laying around your rig/footswitch