Overclocking on a 780i with E6550

This is what happens when I try to OC my e6550 on an EVGA 780i Motherboard. This is right after a bios update.

Category:

Science & Technology

Tags:

• video
• game
• overclocking
• OC
• oc
• nvidia
• 780i
• EVGA
• 8800GT
• overclocked
• overclock
• watercooling
• ram
• 4GB

[saiiad737]

nice schreen i got the same one samsung syncemaster i like it

[Redraptorxx]

does it matter what motherboard you have to overclock or can i just use someone elses settings?

[Jonesy0708]

Dont jump from the stock clock staight up to where u were at 1900 FSB. do it in stages making sure u are stable at each. Id say try go to 2.6ghz, then 2.8ghz, 2.9 thn 3.0. Make sure u turn off all the spread spectrums, turn of C1E, speedstepping and anything else that can adjust the CPU speed. Going slow is best, I left the voltages on auto, and then from what it used i kept lowering it manually till it bluw screen thn went back up 1 notch.

[Frankboom]

I got same motherboard and Cpu than you I overclocked it to 3.4 witht he stock fan with no prob at 45C while playing game, Great Cpup for overclocking

[maurorulo]

i have the same cpu...take a look...

at stock 2.33ghz...runs stable at 1.1V vcore..

at 2.8 ghz...stable at 1.23V vcore..( 4 hours prime95)...and at 3.3ghz..i set the vcore 1.33V and stable....all these on air...bye friend..my mobo...es asus p5k se

[maurorulo]

mmm...i have the same cpu...and.. stock (2.33) I low the vcore to 1.1 V...stable...and in 2.8 ghz.. the vcore is set to 1.23V stable 4 hours sandra....and 3.2 vcore 1.33 stable...all these on air....mother: asus p5k se....4gb..etc etc...i thouth y cuold help....zr for my english....

[SethNkC]

I have a evga 780i FTW with a q9400.. when i first put this together i had overclocked it to 3.4 and it was stable.. that lasted for about a week then it started to hang up then i got the blue screen of death.. so now everything is at stock speed and works just fine.. but if i try to OC it agian it just hang's up.. even the slight OC, it wont even go to 2.9. any help you may have for me would be great..

[GF8800gtx9999]

the same prob i have with the p7n sli platinum......there is somthing wrong with the fsb setting........another question:

do you disabled intel speedstep/c1e support???

[simracr94]

at 5:40 its called spread spectrum control, it'll solve that problem

[iden2008]

wtf? lol